CUTTER'S MUST
- From main fabric:
- 1. BACK PANEL - 2 QTY
- 2. BACK SIDE PANEL - 2 QTY
- 3. FRONT PANEL Center - 2 QTY
- 4. FRONT PANEL Side - 2 QTY
- 5. SLEEVE - 2 QTY
- 6. BACK FACING - 2 QTY
- From FUSIBLE INTERFACING: Back neckline FACING 2 QTY, SEAM ALLOWANCES along front neckline, slit.
Sewing Instructions
- Stitch shoulder darts on the BACK PANEL. Press darts towards the center of the piece.
- On the left center BACK PANEL, cut 5 cm along the vertical edge of the slit. On both center BACK PANEL pieces, interface the slit from the wrong side. On the right side, mark the center seam line (slit fold line). Press the left part along the slit fold line; on the right part, press only the SEAM ALLOWANCES of the right side of the slit (6 cm) to the wrong side. Align the pieces along the center seam and secure at the upper edge of the slit. Overlock the center edge of the BACK PANEL separately on each piece, simultaneously overlocking the slit. Stitch the center edge of the BACK PANEL from the ZIPPER NOTCH to the edge of the slit. Clip the corner of the slit SEAM ALLOWANCES on the right part. Press open the center seam SEAM ALLOWANCES, press the slit SEAM ALLOWANCES and secure them with machine stitching. Insert the ZIPPER from the upper edge to the NOTCH.
- Stitch the princess seams of the BACK PANEL and FRONT PANEL, press the seam towards the center and overlock.
- Interface the SEAM ALLOWANCES along the front neckline edge. On the FRONT PANEL, clip the SEAM ALLOWANCES near the cut marks, overlock and press the neckline edge and the cut area. Hem the SEAM ALLOWANCES along the cut with blind stitches or attach with fusible web. Stitch the center seam of the FRONT PANEL. Press and overlock the seam.
- Interface the BACK PANEL neckline FACINGS with FUSIBLE INTERFACING. Overlock the outer edge of the FACINGS. Place the FACINGS with the BACK PANEL neckline right sides together. Fold back the FACING 5 mm from the edges of the concealed fastener and pin it to the upper edge of the dress. On the right side of the dress, fold back the SEAM ALLOWANCES along the ZIPPER and pin them to the neckline edge over the FACING. Stitch the neckline edge. Clip the seam at the curves, turn the pieces right side out and press. Fold the SEAM ALLOWANCES along the fastener to the wrong side and attach to the ZIPPER tape.
- Stitch the shoulder edges of the BACK PANEL and FRONT PANEL, inserting the FRONT PANEL between the BACK PANEL and FACING pieces. Overlock the seam, turn right side out and press towards the BACK PANEL.
- Cut a TRIM STRIP for the bridge measuring 8*10 cm. Fold in half lengthwise, wrong sides together, to create a 4*10 cm strip. Stitch along the long side. Turn the piece right side out and press, centering the seam. Stitch the bridge into a ring, overlock the seam and topstitch.
- Thread the upper edge of the dress through the bridge. Shift the bridge, stitch the upper edge of the dress. Overlock and press the seam. Position the bridge in the center of the upper edge and secure.
- Stitch the SIDE PANEL edges. Press seams towards the BACK PANEL and overlock.
- Stitch the SLEEVE edge. Press and overlock the seam. Set the SLEEVES into the armholes, matching the NOTCHES. Press and overlock the seam.
- Press the hem of the dress and SLEEVE hem to the wrong side, overlock and hem with blind stitches.
