CUTTER'S MUST
- From main fabric:
- 1. BACK PANEL – 1 QTY on fold
- 2. FRONT PANEL – 1 QTY on fold
- 3. SLEEVE – 2 QTY
- 4. COLLAR – 1 QTY
Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim SEAM ALLOWANCES to 0.8 cm. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlock machine.
Sewing Instructions
- Stitch shoulder seams, serge, and press towards the BACK PANEL.
- Set in SLEEVES into the open armhole. Serge the seam and press towards the SLEEVE.
- Stitch the SLEEVE seam, simultaneously stitching the side seam. Serge the seam and press towards the BACK PANEL.
- Stitch the COLLAR into a loop. Serge the seam and press. Set the COLLAR into the neckline, positioning the COLLAR seam at the left shoulder seam. Serge the seam and press.
- Serge the bottom edge of the garment, the top edge of the COLLAR, and the bottom edge of the SLEEVE. Fold to the wrong side, press, and topstitch.
