Off-Shoulder Silk Nightdress with Tie Sleeves

CUTTER'S MUST

• BACK PANEL – 1 QTY
• FRONT PANEL – 1 QTY
• SLEEVE – 2 QTY

Sewing Instructions

1. Set in the SLEEVES into the armholes of the BACK PANEL. Press the SEAM ALLOWANCES towards the SLEEVE and serge.
2. Set in the SLEEVES into the armholes of the FRONT PANEL. Press the SEAM ALLOWANCES towards the SLEEVE and serge.
3. Stitch the SLEEVE edges and SIDE PANEL edges with one seam. Press the SEAM ALLOWANCES towards the BACK PANEL and serge.
4. Serge the upper edge SEAM ALLOWANCE, press to the wrong side, and topstitch a casing according to the markings, leaving an opening for inserting elastic. Cut a piece of elastic TRIM STRIP of the required length and thread it through the casing.
5. Serge the lower SLEEVE edge SEAM ALLOWANCE, press to the wrong side, and topstitch a casing according to the markings, leaving an opening for inserting elastic. Cut a piece of elastic TRIM STRIP equal to the arm circumference and thread it through the casing.
6. Press the lower edge of the garment to the wrong side, fold inwards, and topstitch.
7. Optionally, form bows from decorative TRIM STRIP and sew them on according to the sketch.