Deep V-Neck Wrap Dress with Lace Insert

CUTTER'S MUST

• From main fabric:
1. Upper BACK PANEL – QTY 2
2. Lower BACK PANEL – QTY 1
3. Upper FRONT PANEL - QTY 2
4. Lower FRONT PANEL - QTY 2
5. SLEEVE - QTY 2
6. CUFF – QTY 2
• From elastic lace:
1. Back Insert – QTY 1
2. Front Insert - QTY 2
• From FUSIBLE INTERFACING: one-piece FACING for the front insert.

Sewing Instructions

1. Fuse the one-piece FACING of the front insert with FUSIBLE INTERFACING.
2. Stitch the waist darts on the upper BACK PANEL. Press the waist darts towards the center of the pieces.
3. Stitch the center back seam of the upper BACK PANEL. Press SEAM ALLOWANCES to the left side and overlock.
4. Attach the insert to the upper BACK PANEL, press SEAM ALLOWANCES towards the insert and overlock.
5. Along the upper edge of the lower BACK PANEL, sew a basting stitch with loosely tensioned stitches and gather the edge to the length of the lower edge of the insert. Attach the lower BACK PANEL to the insert, press SEAM ALLOWANCES towards the insert and overlock.
6. Create pleats on the upper edge of the upper FRONT PANEL and secure them. Sew a basting stitch with loosely tensioned stitches along the lower edge of the upper FRONT PANEL between the NOTCHES at a distance of 0.5 cm from the edge and gather. Attach the front insert to the upper FRONT PANEL, aligning the NOTCHES, press SEAM ALLOWANCES downwards and overlock.
7. Attach the FRONT PANEL to the BACK PANEL, press SEAM ALLOWANCES towards the BACK PANEL and overlock.
8. Cut a BIAS BINDING 4 cm wide and with a length equal to the neckline length of the FRONT PANEL and BACK PANEL. Press the TRIM STRIP in half lengthwise, right side out. Fold the BIAS BINDING right sides together with the neckline SEAM ALLOWANCE and stitch. Fold the TRIM STRIP to the wrong side. Topstitch the SEAM ALLOWANCE onto the TRIM STRIP with a 0.1 cm wide seam.
9. Along the upper edge of the lower FRONT PANEL, sew a basting stitch with loosely tensioned stitches and gather the edge to the length of the lower edge of the insert. Attach the lower FRONT PANEL to the insert, press SEAM ALLOWANCES towards the insert and overlock.
10. Overlock the inner edge of the one-piece FACING, fold the FACING along the NOTCHES to the right side and stitch the upper corner. Trim the SEAM ALLOWANCE, turn the FACING to the right side and press. Topstitch the upper edge of the FACING into the seam of the trim attachment.
11. Stitch the side seams. Press SEAM ALLOWANCES towards the BACK PANEL and overlock.
12. Stitch and overlock the SLEEVE seam.
13. Fold the CUFF in half lengthwise, right side in, and stitch the side seams, trim SEAM ALLOWANCES at the corners and turn to the right side. Press the CUFF. Attach the CUFF to the bottom of the SLEEVE. Press SEAM ALLOWANCES towards the SLEEVE and overlock.
14. Set the SLEEVES into the armholes, easing the cap. Overlock the seam.
15. Press the hem allowance of the garment to the wrong side, turn inwards and topstitch.
16. On the right insert, overlock buttonholes; on the left, sew on buttons.