Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5774
#5776

Sheer Lace Peignoir with Flounce Cuffs

Pattern #5775

A women's hip-length peignoir in sheer silk with an open front, an under-bust seam and long set-in sleeves ending in flounces. The front is gathered under the bust, all edges are bound with bias tape that extends into neck ties, and a scalloped lace band is stitched across the under-bust seam. Drafted to your own measurements. Recommended fabric: thin, sheer silk fabrics of natural or blended fibres.

Tech. Description

Sheer Lace Peignoir with Flounce Cuffs

A women's hip-length peignoir in sheer silk with an open front, an under-bust seam and long set-in sleeves ending in flounces. The front is gathered under the bust, all edges are bound with bias tape that extends into neck ties, and a scalloped lace band is stitched across the under-bust seam.

When To Wear

  • Over a nightdress or slip at home.
  • As a light cover-up when dressing for a wedding or another special day.

Key Design Features

Silhouette: Close to the body above the under-bust seam, loose and straight below.

Length: Hip length, with rounded front corners.

Neckline: V-neck bound with bias tape; the binding is left free at the front for ties about 40 cm long.

Sleeves: Long set-in sleeves with a flounce attached at the lower edge, finished with a narrow rolled hem.

Front: Open, no fastening apart from the neck ties. The upper front is gathered between notches into the under-bust seam.

Back: Upper and lower back joined by a seam at under-bust level, with waist darts.

Finishing: Front edges and lower edge bound with bias tape folded in half; lace with scallops on both edges, 8–10 cm wide, topstitched over the under-bust seam.

Level Of Difficulty

Intermediate. Gathering, continuous bias binding on curved edges of sheer fabric, attaching flounces with rolled hems and applying lace.

Fabric Recommendations

Thin, sheer silk fabrics of natural or blended fibres.

Additional Supplies

  • Bias tape (approximate length marked on the back pattern piece)
  • Lace band with scallops on both edges, 8–10 cm wide (length marked on the back pattern piece)

Cutter's Must

  • From main fabric:
  • 1. Upper back – 1 piece
  • 2. Lower back — 1 piece
  • 3. Upper front - 2 pieces
  • 4. Lower front — 2 pieces
  • 5. Sleeve - 2 pieces
  • 6. Flounce – 2 pieces

Sewing Instructions

  1. Stitch waist darts on the back. Press towards the center of the piece.
  2. Attach the lower back to the upper back. Press seam allowances downwards and serge.
  3. Stitch with loosely tensioned stitches along the lower edge of the upper front between the notches at a distance of 0.5 cm from the edge and gather. Attach the upper front to the lower front, press seam allowances downwards and serge.
  4. Stitch shoulder and side seams. Press seams towards the back and serge.
  5. Press the bias binding in half lengthwise and bind the front edges of the front and the lower edges. Bind the neckline of the back and front, leaving free ends for ties approximately 40 cm long.
  6. Stitch and serge the sleeve seam. Attach the flounce to the lower edge of the sleeve. Press the attachment seam towards the flounce and serge. Finish the lower edge of the flounce with a narrow rolled hem.
  7. Set the sleeves into the armholes according to the notches. Serge the seam allowances.
  8. Topstitch lace onto the negligee according to the sketch.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?