CUTTER'S MUST
- BACK PANEL – 2 QTY
- FRONT PANEL – 1 QTY
- FRONT YOKE - 1 QTY
- BACK YOKE - 2 QTY
- SLEEVE – 2 QTY
Sewing Instructions
- Stitch the waist darts on the BACK PANEL and FRONT PANEL. Press the darts towards the center of the piece.
- Stitch the shoulder darts on the BACK YOKE. Press the darts towards the center back seam.
- On the neckline of the FRONT PANEL, along the marked lines, create pleats and sew a securing stitch 0.5 cm from the neckline edge.
- Stitch the shoulder edges of the BACK YOKE and FRONT YOKE. Serge the seam and press towards the back.
- Attach the SLEEVES to the BACK PANEL and FRONT PANEL along the armhole line. Serge the seams and press towards the SLEEVE. Sew a gathering stitch with loosely tensioned stitches along the upper edge of the SLEEVE and gather.
- Attach the yokes to the BACK PANEL, FRONT PANEL, and SLEEVE. Serge the seam and press upwards.
- On the SLEEVE pieces, mark the elastic attachment line. Place the SLEEVE wrong side up, stretch the elastic, and topstitch with a zigzag stitch, leaving 1 cm at the ends.
- Stitch the SLEEVE edge and the side edge in one continuous seam. Serge the seams and press towards the back.
- Stitch the center back edge from the fastener mark downwards. Press the seams open and serge.
- Finish the neckline with BIAS BINDING, forming a loop for the fastener at the back. Sew a button to the other side of the fastener.
- Finish the bottom of the SLEEVE with a rolled hem. Finish the bottom of the garment, fold, and topstitch.
