Hooded Faux Fur Trim Jacket

Name: Hooded Faux Fur Trim Jacket
Brand: Minerva Patterns
SKU: 5698
Price: 5.00 EUR
Availability: InStock

Pattern #5698

A women's hip-length jacket in faux shearling with an attached hood, a curved overlapping front fastened with three clasps and set-in sleeves. Unlined: the edges of the front, hem, hood and sleeves are turned to the suede side so the pile forms a trim band. Drafted to your own measurements. Recommended fabric: faux shearling with a short or medium pile.

Tech. Description

Hooded Faux Fur Trim Jacket

When To Wear

In autumn and winter as an outer layer over knitwear and trousers or jeans.
For everyday wear in cold weather, with the hood worn up or lying around the neck.

Key Design Features

Silhouette: Semi-fitted, shaped by curved seams joining the centre and side front pieces.

Length: Hip length, with rounded front edges that curve down to the hem.

Collar: Hood cut in front and back parts on each side, joined by a centre seam; the front edge of the hood continues into the overlapping front.

Sleeves: Long, one-piece, set-in; the sleeve seam is sewn in one pass with the side seam.

Closure: Asymmetrical, overlapping front fastened with three clasps sewn on along marked lines.

Back: Centre back seam.

Finishing: Seam allowances pressed open and glued; open edges are clipped, turned to the suede side and topstitched, which shows the pile as a band along the front, hem, hood and sleeve ends.

Level Of Difficulty

Intermediate. Sewing faux shearling with glued open seams, clipping curved allowances, turning and topstitching wide edge allowances, attaching a hood.

Fabric Recommendations

Faux shearling with a short or medium pile.

Additional Supplies

3 clasp fasteners
Fabric glue for seam allowances

Cutter's Must

Front Side – 2 pieces
Front Center – 2 pieces
Back – 2 pieces
Hood Front - 2 pieces
Hood Back - 2 pieces
Sleeve – 2 pieces

Sewing Instructions

Fold the side and center parts of the front fur-side in and stitch. Press seam allowances open and glue.
Fold the back pieces together fur-side in and stitch the center back seam. Press seam allowances open and glue.
Stitch the shoulder seams of the sheepskin coat. Press seam allowances open and glue.
Set the sleeves into the open armholes, matching notches. Clip seam allowances, press open, and glue: the sleeve allowance onto the sleeve, the armhole allowance onto the back and front.
Stitch the sleeve seam, simultaneously stitching the side seam. Press seam allowances open and glue.
Attach the back of the hood to the front. Press seam allowances open and glue. Stitch the hood along the center line. Press seam allowances open and glue.
Attach the hood to the garment. Clip seam allowances, press open, and glue: the hood allowance onto the hood, the neckline allowance onto the back and front.
Clip seam allowances along the front edge, hemline, hood, and sleeve hem, turn to the suede side, and topstitch.
Sew the fastener along the marked lines.