CUTTER'S MUST
- From main fabric:
- 1. COLLAR Stand - 2 QTY
- 2. BACK PANEL – 2 QTY
- 3. FRONT PANEL – 1 QTY
- 4. Upper part of FRONT PANEL – 1 QTY
- FROM FUSIBLE INTERFACING: lower COLLAR stand.
Sewing Instructions
- Fuse FUSIBLE INTERFACING to the lower COLLAR stand.
- Stitch and press down the bust dart on the FRONT PANEL; stitch and press towards the center the waist darts on the BACK PANEL and FRONT PANEL.
- Press the BIAS BINDING for finishing the lower edge of the upper FRONT PANEL and the curved edge on the FRONT PANEL in half lengthwise, right side out. Fold: with the lower edge of the upper FRONT PANEL and the curved edge of the FRONT PANEL, and stitch.
- Serge: the SIDE PANEL edges of the BACK PANEL, FRONT PANEL, and its upper part, the armhole edges of the FRONT PANEL and its upper part, and the armhole edges of the BACK PANEL. Stitch and serge the shoulder SEAM ALLOWANCES of the dress. Press the shoulder SEAM ALLOWANCES towards the BACK PANEL.
- Stitch and press open the side seam of the upper FRONT PANEL and the left side seam of the BACK PANEL.
- Stitch the left side seam from the ZIPPER mark to the slit. Press open the side seam ALLOWANCES, press the edges of the slit for the ZIPPER closure. Place the ZIPPER under the slit so that the teeth are not visible and stitch. Stitch and press open the right side seam up to the NOTCHES, leaving the slit unstitched. Fold and topstitch the armhole SEAM ALLOWANCES.
- Stitch and serge the center back seam of the BACK PANEL.
- Press up the lower edge of the COLLAR stand by 1cm. Stitch the COLLAR stands along the outer contour. Trim the SEAM ALLOWANCES at the rounded ends of the COLLAR stand, turn the COLLAR stand right side out and press. Attach the COLLAR stand to the neckline, and topstitch the pressed edge of the COLLAR stand into the seam of the lower COLLAR stand attachment. Topstitch along the COLLAR stand.
- Measure the length of the slits. Trim and serge the hem of the dress. Stitch the lower corners of the slits, and turn out the corners, straightening them. Secure the slit SEAM ALLOWANCES to the main pieces with fusible web. Fold and topstitch the hem of the garment.
- Sew button loops to the upper FRONT PANEL, and hooks to the FRONT PANEL. Sew decorative button loops to the FRONT PANEL and its upper part.
