Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5282
#5284

Button-Down Collared Cuffed Short Sleeve Blouse

Pattern #5283

A straight, hip-length women's blouse with a pointed collar on a stand, a cut-on button placket, short set-in sleeves with a turn-up folded from the hem allowance, bust darts and side slits. Drafted to your own measurements. Recommended fabric: crinkle chiffon.

Tech. Description

Button-Down Collared Cuffed Short Sleeve Blouse

A straight, hip-length women's blouse with a pointed collar on a stand, a cut-on button placket, short set-in sleeves with a turn-up folded from the hem allowance, bust darts and side slits.

When To Wear

  • In summer with trousers, shorts or skirts, worn loose over the waistband.
  • For the office in warm weather, alone or under a light jacket.

Key Design Features

Silhouette: Straight and loose, with bust darts from the side seams, topstitched.

Length: Hip length, with short slits at the side seams.

Collar: Pointed shirt collar on a stand, both topstitched along the edges.

Front: Full-length button closure on a placket cut in one with the front, interfaced and topstitched; 5 buttons, buttonholes on the right front.

Sleeves: Short set-in sleeves. The hem allowance is pressed twice to the wrong side by 3 cm, topstitched at foot width and folded back down to form the turn-up, its lower edge also topstitched.

Back: One piece, no darts and no centre back seam.

Finishing: Shoulder and armhole seams topstitched; every seam pressed, overlocked and pressed again; hem and slit allowances turned and topstitched.

Level Of Difficulty

Intermediate. Collar on a stand, a cut-on placket with buttonholes, side slits, topstitching on a fine, crinkled fabric.

Fabric Recommendations

Crinkle chiffon.

Additional Supplies

  • Fusible interfacing (front placket, upper collar, collar stand)
  • 5 buttons

Cutter's Must

  • From main fabric:
    • Front – 2 pieces
    • Back – 1 piece
    • Sleeve – 2 pieces
    • Collar – 2 pieces (upper and under collar)
    • Stand Collar – 2 pieces
  • From fusible interfacing:
    • Front placket areas
    • Collar – 1 piece (upper collar)
    • Stand Collar – 1 piece

Sewing Instructions

  1. Press each seam after stitching, serge, and press again.
  2. Fuse interfacing to the front placket areas, the upper Collar and the Stand Collar.
  3. Stitch the bust darts on the Fronts and topstitch them.
  4. Stitch the shoulder seams of the blouse, topstitch.
  5. Set in the sleeves, topstitch the seams.
  6. Serge the side edges of the blouse separately for a length of 15 cm from the bottom, then stitch the seams up to the slit markings.
  7. Press the sleeve hem allowance twice to the wrong side by 3 cm, topstitch the fold at foot width, then press the hem allowance down again. Topstitch the lower edge of the fold also at foot width.
  8. Finish the front plackets.
  9. Stitch the upper and under Collar pieces together, turn the collar right side out and topstitch.
  10. Stitch the two Stand Collar pieces together, sandwiching the Collar between them.
  11. Sew the inner Stand Collar, with the collar, into the neckline; turn under the open edge of the outer Stand Collar and topstitch it over the seam.
  12. Hem and topstitch the bottom of the garment. Hem and topstitch the slit allowances.
  13. On the right front, make buttonholes, and on the left front, sew on buttons.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?