Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5278
#5280

Leather Decorative Wave Panel Jacket

Pattern #5279

A women's hip-length jacket for leather or suede, cut into horizontal bands joined by wavy seams on the front and back. It has a stand collar, deep cuffs on the sleeves and a single button with a cord loop. Drafted to your own measurements. Recommended fabric: faux or genuine leather, suede.

Tech. Description

Leather Decorative Wave Panel Jacket

A women's hip-length jacket for leather or suede, cut into horizontal bands joined by wavy seams on the front and back. It has a stand collar, deep cuffs on the sleeves and a single button with a cord loop.

When To Wear

  • In spring and autumn as a light outer layer over tops, blouses and fine knitwear.
  • With straight trousers, jeans or a slim skirt; the front edges meet at the centre, so it can be worn open or fastened at the waist.

Key Design Features

Silhouette: Fitted at the waist with darts on the front and back.

Length: Hip length.

Collar: Stand collar cut in two layers, the outer layer topstitched in place.

Sleeves: One-piece set-in sleeves, eased at the cap, with a wide cuff sewn to the lower edge; the drawing shows decorative cross stitches on each cuff.

Front: Each front is made of four parts: a yoke, the main front, a wavy insert at the waist and a lower part. The wavy seams are lapped and topstitched. Edge-to-edge front finished with facings.

Closure: One button on the left front and a cord loop on the right front, at the waist.

Back: Built the same way as the front: back yoke, back, wavy insert and lower part, all joined with topstitched lapped seams.

Finishing: Optional decorative stitching along the front edges and darts; topstitched hem.

Level Of Difficulty

Intermediate. Matching curved lapped seams in leather, a two-layer stand collar, set-in sleeves eased at the cap.

Fabric Recommendations

Faux or genuine leather, suede.

Additional Supplies

  • Fusible interfacing (facings, collar stand)
  • 1 button
  • Cord for the button loop

Cutter's Must

From main fabric:

  • 1. Front Yoke – 2 pieces
  • 2. Front – 2 pieces
  • 3. Front Inset – 2 pieces
  • 4. Lower Front – 2 pieces
  • 5. Back Yoke – 1 piece
  • 6. Back – 1 piece
  • 7. Back Inset – 1 piece
  • 8. Lower Back – 1 piece
  • 9. Center Front Facing – 2 pieces
  • 10. Cuff – 2 pieces
  • 11. Sleeve – 2 pieces
  • 12. Stand Collar – 2 pieces
  • From fusible interfacing: Center Front Facing, Stand Collar.

Sewing Instructions

  1. Fuse interfacing to the center front facings and the stand collar.
  2. Stitch the darts on the fronts and the back.
  3. Lap the front yoke onto the front and topstitch it in place with a decorative line of stitching.
  4. Lap the front inset onto the front and topstitch it in place with a decorative line of stitching.
  5. Lap the front inset onto the lower front and topstitch it in place with a decorative line of stitching.
  6. Lap the back yoke onto the back and topstitch it in place with a decorative line of stitching.
  7. Lap the back inset onto the back and topstitch it in place with a decorative line of stitching.
  8. Lap the back inset onto the lower back and topstitch it in place with a decorative line of stitching.
  9. Stitch the shoulder seams.
  10. Stitch the side seams.
  11. Stitch the upper and under stand collar pieces together along the outer edge and ends, then turn right side out.
  12. Stitch the under stand collar to the neckline. Topstitch the upper stand collar in the attachment seam of the under stand collar.
  13. Stitch the cuff to the lower edge of each sleeve.
  14. Stitch the sleeve seams.
  15. Make a button loop from cord.
  16. Stitch the loop to the right front.
  17. Stitch the center front facings to the front edges and turn.
  18. Set in the sleeves, easing the sleeve cap.
  19. Sew the button to the left front. If desired, add decorative stitching along the panel seams, the front edges and the darts.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?