Leather Decorative Wave Panel Jacket

Fabric & Materials

FROM FUSIBLE INTERFACING: FACING, COLLAR STAND.

CUTTER'S MUST

• From main fabric:
• 1. FRONT PANEL YOKE - 2 QTY
• 2. FRONT PANEL – 2 QTY
• 3. FRONT PANEL INSERT – 2 QTY
• 4. Lower part of FRONT PANEL – 2 QTY
• 5. BACK PANEL YOKE - 1 QTY
• 6. BACK PANEL – 1 QTY
• 7. BACK PANEL INSERT – 1 QTY
• 8. Lower part of BACK PANEL – 1 QTY
• 9. FACING - 2 QTY
• 10. CUFF – 2 QTY
• 11. SLEEVE - 2 QTY
• 12. COLLAR STAND – 2 QTY

Sewing Instructions

1. Reinforce the FACING and COLLAR STAND with FUSIBLE INTERFACING.
2. Stitch darts on the FRONT PANEL and BACK PANEL.
3. Topstitch the yoke to the FRONT PANEL, creating a decorative stitch.
4. Topstitch the FRONT PANEL insert to the FRONT PANEL, creating a decorative stitch.
5. Topstitch the FRONT PANEL insert to the lower part of the FRONT PANEL, creating a decorative stitch.
6. Topstitch the yoke to the BACK PANEL, creating a decorative stitch.
7. Topstitch the BACK PANEL insert to the BACK PANEL, creating a decorative stitch.
8. Topstitch the BACK PANEL insert to the lower part of the BACK PANEL, creating a decorative stitch.
9. Stitch shoulder seams.
10. Stitch side seams.
11. Face the lower COLLAR STAND with the upper COLLAR STAND.
12. Set the COLLAR STAND into the neckline. Topstitch the upper COLLAR STAND into the seam of the lower COLLAR STAND attachment.
13. Attach the CUFF to the lower edge of the SLEEVE.
14. Stitch the seams on the SLEEVES.
15. Prepare a loop from cord.
16. Attach the loop to the right FRONT PANEL.
17. Face the edges with FACINGS.
18. Set in the SLEEVES, easing at the cap.
19. Sew buttons to the left FRONT PANEL. If desired, decorative stitches can be added along the princess seams, edge of the front opening, and darts.