Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5257
#5259

Short Hooded Wrap Robe

Pattern #5258

A short women's wrap robe with the hood cut in one with the fronts, set-in long sleeves, patch pockets and a tie belt. The front edges, hood edge and sleeve hems are bound with silk ribbon. Drafted to your own measurements. Recommended fabric: light napped fabrics or bouclé.

Tech. Description

Short Hooded Wrap Robe

A short women's wrap robe with the hood cut in one with the fronts, set-in long sleeves, patch pockets and a tie belt. The front edges, hood edge and sleeve hems are bound with silk ribbon.

When To Wear

  • As a dressing gown after a bath or shower, in a napped or bouclé fabric.
  • At home over pyjamas in the cooler months.

Key Design Features

Silhouette: Straight and loose, wrapped and tied at the waist.

Length: Mid-thigh.

Collar: Hood cut in one with each front, shaped by darts at the shoulder line. The hood has a centre seam and an upper seam, pressed open and topstitched, joined by a crosswise seam at the crown; the back is topstitched along the hood seam.

Sleeves: Long, straight, set-in sleeves; the hems are bound with silk ribbon.

Closure: Wrap front with a separate tie belt, its edges topstitched.

Pockets: Patch pockets on the fronts, with a cut-on facing at the top, topstitched along the facing and to the front.

Back: One piece cut on the fold.

Finishing: Front and hood edges bound with silk ribbon stitched 1 cm from the edge, wrapped to the inside and stitched in the ditch; hem turned up and topstitched.

Level Of Difficulty

Intermediate. A hood cut in one with the front, which needs clipping and accurate stitching at the dart points, plus ribbon binding of curved edges.

Fabric Recommendations

Light napped fabrics or bouclé.

Additional Supplies

  • Silk ribbon for binding the front edges, hood and sleeve hems

Cutter's Must

From main fabric:

  • 1. Back – 1 piece on fold
  • 2. Pocket – 2 pieces
  • 3. Front – 2 pieces
  • 4. Waistband – 1 piece
  • 5. Sleeve – 2 pieces

Sewing Instructions

  1. Turn the cut-on facing at the top of each pocket to the right side and stitch it at the side edges. Turn the facing to the wrong side and press the seam allowances of the remaining pocket edges to the wrong side as well. Topstitch the pocket along the facing. Pin each pocket to a front and topstitch a presser-foot width from the edge.
  2. Place the fronts right sides together and stitch the centre and upper seams of the hood. Press the seams open and topstitch a presser-foot width from the seam. Turn the hood wrong side out, match the centre and upper seams and stitch the crosswise seam at the top of the hood.
  3. On the fronts, clip the seam allowances between the shoulder seams and the hood, stopping 1 cm short of the far sides of the darts. Slash the dart folds through the middle for about 3 cm. Stitch the shoulder seams, starting or ending exactly at the dart. Press the seam allowances open.
  4. Stitch the hood into the back neckline, starting and ending exactly at the dart. Press the seam allowances downwards. Stitch the darts on the fronts and hood. Trim wide dart allowances to 1 cm and overlock. Topstitch the back along the hood seam.
  5. Stitch the side seams.
  6. Press the hem allowance to the wrong side and topstitch. Place the silk ribbon on the robe right sides together and stitch it along the front edges and hood edge 1 cm from the edge. Fold the ribbon to the wrong side around the edge and stitch in the ditch of the attachment seam from the right side, catching the inner edge of the ribbon.
  7. Stitch the sleeve seams. Bind the sleeve hems with silk ribbon in the same way as the front edges. Set the sleeves into the armholes.
  8. Fold the waistband right sides together, stitch along the long edge and one short end, turn right side out and press the edges. Turn in the open end and topstitch around the edges of the waistband a presser-foot width from the edge.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?