Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5256
#5258

Long Kimono Style Wrap Robe

Pattern #5257

A long women's wrap robe in kimono style: a straight body, wide elbow-length sleeves attached only part-way round the armhole, a folded band along the front edges and neck, in-seam pockets and a tie belt held by rouleau loops. Drafted to your own measurements. Recommended fabric: silk or mixed-fibre fabrics, or cotton flannel.

Tech. Description

Long Kimono Style Wrap Robe

A long women's wrap robe in kimono style: a straight body, wide elbow-length sleeves attached only part-way round the armhole, a folded band along the front edges and neck, in-seam pockets and a tie belt held by rouleau loops.

When To Wear

  • As a dressing gown at home: in silk for summer, in cotton flannel for colder months.
  • Over a nightdress or pyjamas.

Key Design Features

Silhouette: Straight and loose, wrapped and tied at the waist.

Length: Below the knee.

Collar: A band of two pieces joined at the centre back, folded in half lengthwise and stitched to the front edges and neckline, forming a kimono-style V-neck.

Sleeves: Wide straight sleeves on a dropped shoulder. The sleeve is set into the armhole only between notches; the remaining sleeve and armhole edges are turned under and topstitched, leaving an opening under the arm.

Closure: Wrap front tied with a belt; two narrow rouleau loops are caught into the side seams to hold it.

Pockets: In-seam pockets in the side seams, two bags per pocket.

Back: One piece cut on the fold.

Finishing: Hem turned up and topstitched; band seam allowances overlocked together.

Level Of Difficulty

Beginner. Straight seams, in-seam pockets, a folded band and rouleau loops; the partly set sleeve needs accurate notch matching.

Fabric Recommendations

Silk or mixed-fibre fabrics, or cotton flannel.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

From main fabric:

  • Pocket – 4 pieces
  • Back – 1 piece on fold
  • Front – 2 pieces
  • Waistband – 1 piece
  • Center Front Facing – 2 pieces
  • Sleeve – 2 pieces
  • Belt-Loop – 2 pieces
  • Tie – 1 piece

Sewing Instructions

  1. Make a narrow rouleau from each belt-loop piece, fold each into a loop and baste the loops to the fronts between the crosswise notches.
  2. Place the pocket pieces on the pocket opening allowances right sides together and stitch exactly on the side seam line between the notches.
  3. Stitch the shoulder seams. Press the seam allowances towards the back.
  4. Stitch the side seams from the second notch down to the hem, stitching the pocket pieces together in the same seam.
  5. Stitch the sleeve seams and, continuing the same line of stitching, stitch the lower edges up to the crosswise notch and the upper edges up to the first notch. Set the sleeves into the armholes between the second notches.
  6. Turn under the seam allowances of the open sleeve and armhole edges and topstitch.
  7. Stitch the two Center Front Facing pieces together at the centre back and press the seam open. Fold the band in half lengthwise, stitch across the short ends and turn right side out. Stitch the folded Center Front Facing to the front edges and neckline. Overlock the seam allowances together.
  8. Press the hem allowance to the wrong side and topstitch.
  9. Fold the waistband right sides together, stitch along the long edge and one short end, turn right side out and press the edges. Turn in the open end and edgestitch the waistband 0.1 cm from the edge.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?