Sewing Instructions
- Stitch the darts on the dress FRONT PANEL. Stitch the center BACK PANEL seam.
- Attach the inserts to the FRONT PANEL and BACK PANEL, placing them right sides together. Press the SEAM ALLOWANCES towards the main garment.
- Stitch the side seams, leaving an opening for the ZIPPER in the left side seam. Press the ZIPPER SEAM ALLOWANCES to the wrong side. Place the ZIPPER under the edges of the opening and stitch so that the teeth are not visible.
- Fold the BIAS BINDING in half lengthwise, right sides out, and press. Unfold the strip, fold the raw edges towards the fold to the wrong side, and fold the strip along this fold. Trim the SEAM ALLOWANCES at the top of the dress and armholes to 0.5 cm. Insert the upper raw edges into the finished neckline edge and topstitch 1 mm from the lower fold.
- Bind the armholes with BIAS BINDING starting from the side seam, across the BACK PANEL, forming a strap, across the FRONT PANEL, and ending at the side seam.
- Finish the bottom of the dress with a 1 cm hem.
