Single-Breasted Organza Jacket with patch pockets

CUTTER'S MUST

• From main fabric:
• 1. FRONT PANEL - 2 QTY
• 2. Side part of FRONT PANEL - 2 QTY
• 3. BACK PANEL - 2 QTY
• 4. Upper part of SLEEVE - 2 QTY
• 5. Elbow part of SLEEVE - 2 QTY
• 6. COLLAR - 2 QTY with fold
• 7. Front FACING - 2 QTY
• 8. Back neckline FACING - 1 QTY with fold
• 9. Pocket - 2 QTY
• From FUSIBLE INTERFACING: Additionally, iron FUSIBLE INTERFACING to the SEAM ALLOWANCES for the hem of the BACK PANEL pieces.

Sewing Instructions

1. Sew the center back seam, and stitch the darts on the BACK PANEL. Press the seam allowances to the left, and press the dart depths towards the center front line.
2. Attach the side parts of the FRONT PANELs to the FRONT PANELs. Press the seam allowances towards the side edges. Stitch the darts. Trim the seam allowances to 0.75 cm width and press upwards.
3. Patch pockets. Turn the integrated top FACING of each pocket to the right side and attach to the side edges. Turn the FACING to the wrong side, also turn the SEAM ALLOWANCES along the remaining pocket edges to the wrong side. Topstitch the pocket along the upper edge according to the markings. Pin the pocket to the FRONT PANEL and topstitch close to the edge.
4. Sew the side and shoulder seams.
5. COLLAR with lapels. Neatly stitch the COLLAR along the outer contour and, taking the open longitudinal edges together, baste into the neckline.
6. Attach the back neckline FACING to the front FACINGs. Trim the SEAM ALLOWANCES along the inner edges of the front FACINGs and FACING to 0.5 cm width, and overcast the edges.
7. Fold the front FACINGs and FACING with the jacket right sides together and attach to the lower edges of the FRONT PANELs, the edges of the fronts, lapels, and neckline, catching the COLLAR.
8. Turn the front FACINGs, FACING, and the SEAM ALLOWANCE for the jacket hem to the wrong side. Press the edges. Overcast the edge of the SEAM ALLOWANCE for the jacket hem.
9. Hand-stitch the inner edges of the FACING and front FACINGs to the seam allowances and the jacket hem. Hand-stitch the SEAM ALLOWANCE for the jacket hem.
10. Sew the SLEEVE seams. Press the SEAM ALLOWANCES for the SLEEVE hems to the wrong side and hand-stitch.
11. Set in the SLEEVEs, easing them at the sleeve caps.
12. Sew buttons to the FRONT PANELs so that the stitches are visible on the right side of the FRONT PANEL/front FACING.