CUTTER'S MUST
- MAIN FABRIC:
- FRONT PANEL center - 1 QTY
- FRONT PANEL SIDE PANEL - 2 QTY
- BACK PANEL center - 2 QTY
- BACK PANEL SIDE PANEL - 2 QTY
- SLEEVE - 2 QTY
- BACK NECK FACING - 2 QTY
- FRONT NECK FACING - 1 QTY
- FUSIBLE INTERFACING:
- BACK NECK FACING - 2 QTY
- FRONT NECK FACING - 1 QTY
Sewing Instructions
- Stitch the relief SEAM ALLOWANCES of the BACK PANEL and FRONT PANEL, shoulder SEAM ALLOWANCES, side SEAM ALLOWANCES in sequence. Overcast the seams.
- Stitch the shoulder seams of the neck FACINGS.
- Face the neckline with FACINGS, clip the SEAM ALLOWANCES multiple times. Turn the FACINGS out and press.
- Turn the SEAM ALLOWANCES of the center BACK PANEL seam inwards, insert the ZIPPER between them and topstitch close to the edge.
- Finish the SLEEVES:
- Press the lower edges of the SLEEVES
- Finish the bottom of the SLEEVES with a hemmed seam
- Set the SLEEVES into the armholes, easing the cap and aligning the NOTCHES
- Overcast the edges of the SLEEVES and armholes
- Finish the bottom of the garment with a hemmed seam.
