Pattern

Fabric & Materials

FABRIC RECOMMENDATIONS: medium stretch knit fabric made of natural or blended fibers in contrasting or analogous colors.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, THE PATTERNS ARE WITHOUT SEAM ALLOWANCES. SEAM ALLOWANCES: hem allowance for the garment bottom and sleeve hem – 1.5 cm, other seams 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED. WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Back – 1 piece on fold
  • Side front – 2 pieces
  • Sleeve – 2 pieces
• From main fabric 1:
  • Center front – 1 piece

Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.

Sewing Instructions

1. Stitch the front princess seam, press seam allowances towards the center and serge.
2. Stitch the right shoulder seam, press seam allowances towards the back and serge. Cut a bias binding, 4 cm wide and with a length equal to the neckline length. Fold the binding in half lengthwise, right side out, and press. Place the binding on the wrong side of the neckline and stitch. Turn to the right side and topstitch. Stitch the left shoulder seam, press seam allowances towards the back and serge. Place a bar tack on the neckline at the level of the shoulder seam.
3. Set in sleeves into open armholes, matching notches. Press and serge seam allowances.
4. Stitch side seams simultaneously with sleeve seams, press and serge seam allowances.
5. Serge the bottom edge of the garment and the bottom edge of the sleeve, press to the wrong side and topstitch.