Classic Tailored Belted Coat

Classic Tailored Coat with Belt and Structured Silhouette

A women's below-the-knee lined coat with a notched collar and lapels, princess seams front and back, in-seam pockets in the front princess seams and a separate tie belt. The right front buttons over the left, with an inner button underneath.

When To Wear

• In autumn and early spring over dresses, suits and knitwear.
• Belted at the waist, or open with the belt left off.

Key Design Features

Silhouette: Semi-fitted, shaped by princess seams and darts on the back and centre fronts; the belt draws in the waist.

Length: Below the knee.

Collar: Notched collar with lapels: the lower collar is set into the coat neckline and the upper collar into the facings. Front edges understitched 0.2 cm.

Sleeves: Long two-piece set-in sleeves with elbow and front seams; shoulder pads.

Closure: Buttonholes on the right front and buttons on the left front; one more buttonhole at the top of the left front fastens to an inner button.

Pockets: In-seam pockets in the front princess seams, with lining-fabric pocket bags.

Back: Centre back seam, princess seams and darts.

Waist: Separate tie belt, cut in one piece and folded lengthwise.

Lining: Full lining of the body and sleeves, cut from the main pieces minus the facings and bagged out through an opening in the left side seam.

Level Of Difficulty

Intermediate. A notched collar with faced lapels, in-seam pockets in princess seams, a bagged full lining, set-in two-piece sleeves with shoulder pads and buttonholes.

Fabric Recommendations

Coating fabrics made from natural or blended fibres.

Additional Supplies

• Lining fabric
• Fusible interfacing (centre fronts, front facings, upper collar, back neck facing; back armhole allowances, hems and pocket openings)
• 5 buttons
• Shoulder pads

Cutter’s Must

From Main Fabric:

1. Center Back – 2 pieces
2. Side Back – 2 pieces
3. Center Front – 2 pieces
4. Side Front – 2 pieces
5. Upper Collar – 1 piece
6. Lower Collar – 1 piece
7. Upper Sleeve – 2 pieces
8. Lower Sleeve – 2 pieces
9. Back Neckline Facing – 1 piece
10. Center Front Facing – 2 pieces
11. Waistband (tie belt) – 1 piece

From Lining Fabric:

Lining pieces are cut using main pattern pieces with the following modifications:

1. Center Back – cut 2 pieces excluding the Back Neckline Facing
2. Side Back – cut 2 pieces
3. Center Front – cut 2 pieces excluding the Center Front Facing
4. Side Front – cut 2 pieces
5. Upper Sleeve – cut 2 pieces
6. Lower Sleeve – cut 2 pieces
7. Pocket Bag – cut 4 pieces

From Fusible Interfacing:

All interfacing pieces are cut using the corresponding main pattern pieces.

• Center Front – 2 pieces
• Center Front Facing – 2 pieces
• Upper Collar – 1 piece
• Back Neckline Facing – 1 piece

Additionally, interface:

• Back armhole seam allowances
• Hem allowance of the coat
• Sleeve hem allowances
• Seam allowances along the pocket openings

Important Information

Before cutting your fabric:

• Print and lay out pattern pieces to determine yardage.
• Check mirrored pieces, notches, and grainlines.
• For patterned fabrics, align carefully for symmetry.

Assembly Instructions

1. Interfacing

Apply fusible interfacing to the required pattern pieces.

2. Back Assembly

Stitch the darts on the back, press the dart intake toward the center.

Stitch the princess seams joining the Center Back and Side Back, press the seam allowances open.

Stitch the center back seam, press the seam allowances open.

3. Front Assembly and Pockets

On the Center Front, stitch the darts, press the dart intake downward.

Attach the Pocket Bag pieces to the Center Front and Side Front, press the seam allowances toward the pocket bags.

Stitch the princess seams joining the Center Front and Side Front, stitching the pocket bags together at the same time.

Press the seam allowances open, clipping the corner on the Side Front.

Press the pocket bags toward the center.

4. Shoulder and Side Seams

Stitch the shoulder and side seams of the coat, press the seam allowances open.

5. Collar Assembly

Place the Upper Collar and Lower Collar right sides together and stitch along the ends and outer edge.

Begin and end the stitching exactly at the marked collar attachment line.

Trim the seam allowances along the curves and clip at the marking.

Turn the collar right side out, shape, and press.

6. Facing Assembly

Stitch the shoulder seams joining the Center Front Facing and the Back Neckline Facing, press the seam allowances open.

7. Front Facing Attachment

Place the Center Front Facing onto the Center Front, right sides together, pin, and stitch along the front edge and lapel.

Stitch upward to the notch marking the end of the collar attachment.

Trim seam allowances at the corners.

Understitch the seam allowance:
– in the closure area to the Center Front Facing
– in the lapel area to the Center Front

Position the stitching 0.2 cm from the seam.

Turn the front edges right side out and shape the seams.

8. Collar Attachment

Attach the Lower Collar to the neckline of the coat, and the Upper Collar to the neckline edge of the Back Neckline Facing and Center Front Facing.

Press the seam allowances open and secure them close to the seams.

9. Sleeve Assembly

Stitch and press open the elbow seam of the sleeve (Upper Sleeve to Lower Sleeve).

Press the sleeve hem allowance.

Stitch and press open the front seam of the sleeve.

Set the sleeves into the armholes.

Attach the shoulder pads.

10. Lining Assembly

On the lining pieces, stitch the seams, leaving an opening in the left side seam for turning.

Set in the lining sleeves.

Attach the lining to the Center Front Facing and Back Neckline Facing.

11. Joining Lining

Attach the lining to the hem of the coat and the sleeve hems.

Turn the coat right side out through the opening.

Sew the opening closed.

12. Buttonholes and Buttons

Work buttonholes on the right Center Front.

Sew buttons on the left Center Front.

On the left Center Front, work one upper buttonhole and sew on the inner button.

13. Belt Assembly

Fold the Waistband (tie belt) in half lengthwise, right sides together, and stitch along the contour, leaving an opening at the middle.

Trim the seam allowances, turn right side out, and press.

Sew the opening closed.