Hooded Belted Flared Coat
Presenting a sophisticated women's coat pattern, expertly designed with a flattering flared silhouette, an integrated hood, and a cinched waistline defined by a stylish tie belt.
When To Wear
This versatile coat is designed to provide elegance and warmth, making it ideal for:
- Everyday Elegance: Elevates daily outfits with a touch of polished sophistication.
- Transitional Weather: Offers stylish warmth during cooler seasons like autumn & spring.
- Smart Casual & Dressy Outings: Complements both dressed-up looks and refined casual ensembles for city strolls or events.
Key Design Features
Silhouette: Fitted through the bodice and waist, gracefully flaring out from the hip to a knee-length hem, creating a classic a-line profile.
Neckline & Hood: a generously sized, integrated hood offers warmth and a stylish frame for the face.
Closure: Single-breasted front with four prominent buttons providing a secure and decorative fastening.
Sleeves: Long, tailored two-piece set-in sleeves ensure a refined fit and ease of movement.
Pockets: Functional welt pockets with clean, defined openings are integrated into the front panels.
Back: Features vertical seaming (center back and princess seams) to provide shaping before the elegant flare begins at the waist.
Waist: Defined by a wide, self-fabric tie belt that can be cinched for a customized fit, complete with subtle belt loops to keep it in place.
Length: a chic knee-length finishes the coat, offering both coverage and a flattering line.
Level Of Difficulty
Intermediate. Involves techniques such as sewing princess seams, constructing welt pockets, setting in two-piece sleeves, and full lining with an integrated hood.
Fabric Recommendations
Choose medium-weight coat fabrics that offer good structure and drape for the flared silhouette:
- Coat fabrics made from natural or blended fibers
Additional Supplies
- Lining fabric
- Shoulder pads
- Sleeve heads
- Fusible interfacing
- 4 buttons
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom of the garment and sleeve hem - 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Center back – 1 piece
- Side back – 2 pieces
- Center front – 2 pieces
- Side front – 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- Hood – 2 pieces
- Center hood – 1 piece
- Hood facing – 1 piece
- Front facing – 2 pieces
- Back neckline facing – 1 piece
- Welt – 2 pieces
- Pocket facing – 2 pieces
- Belt – 1 piece
- From lining fabric:
- Center back – 1 piece
- Side back – 2 pieces
- Center front – 2 pieces
- Side front – 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- Hood – 2 pieces
- Center hood – 1 piece
- Large pocket bag — 2 pieces
- Small pocket bag — 2 pieces
- From fusible interlining:
- Center front — 2 pieces
- Front facing — 2 pieces
- Hood facing – 1 piece
- Back neckline facing — 1 piece
- Welt – 2 pieces
Also, duplicate the armhole areas on the back and front, pocket opening, bottom of the garment, and sleeves. Attention! Lining pieces are cut deducting the width of the front facing, back neckline facing, and hood facing.
Sewing Instructions
- Fuse interlining to the designated pieces.
- On the center back, stitch the shoulder darts, press the dart allowances towards the center. Stitch the back princess seams, press allowances open.
- Stitch the front princess seams, press allowances open.
- Press the welt lengthwise in half, wrong sides together. Stitch the small pocket bag to the wrong side of the welt. Attach the welt to the front along the lower pocket marking line. Stitch the pocket facing to the large pocket bag, folding the long edge inwards. Attach the large pocket bag to the front along the upper pocket marking line. The ends of the stitching should finish at the short marking lines. Cut the pocket opening. At a distance of 1-1.5 cm from the end of the pocket, make diagonal cuts. Turn the welt and large pocket bag to the wrong side through the opening. Secure the ends of the pocket from the wrong side with a double backstitch at the base of the corners. Stitch and overlock the pocket bag edges.
- Stitch the shoulder and side seams, press allowances open.
- Attach the side hood pieces to the center piece, press allowances open. Set the hood into the garment neckline, clip allowances, press open.
- Stitch the shoulder seams of the front facings and neckline facing, press allowances open.
- Attach the side hood pieces of the lining to the center piece, press allowances open. Attach the hood facing to the lining, press allowances towards the facing. Set the hood into the neckline of the front facings and neckline facing, clip allowances at curves, press open.
- Overlock and press the hem allowance of the garment bottom to the wrong side. Place the front facing on the right side of the front, right side down. Pin the front facing and the top of the garment and stitch along the front edge and around the hood. Stitch the lower edge of the front facing to the front strictly along the marked hemline, stopping 1.5 cm before the inner edge of the front facing. Turn the fronts to the right side, straighten the seams. Secure the allowances of the hood insertion seams together close to the seams.
- Stitch and press open the elbow seam of the sleeve. Press the hem allowance to the wrong side. Stitch and press open the front seam of the sleeve. Along the upper edge of the sleeve cap, stitch with a small stitch length. Gather the ease and shrink it. Set the sleeves into the armholes, matching notches. Insert shoulder pads and sleeve heads.
- On the lining pieces, stitch darts and seams, set in sleeves. Overlock, fold, and topstitch the lower edge of the lining. Attach the lining to the inner edges of the front facings and the back neckline facing. Attach the lining to the sleeve hem.
- Fold the belt lengthwise in half, right sides together, and stitch along the contour, leaving an opening for turning. Trim allowances at corners, turn the belt to the right side. Close the opening.
