Relaxed Fit Stand Collar Yoke Coat

Name: Relaxed Fit Stand Collar Yoke Coat
Brand: Minerva Patterns
SKU: 4791
Price: 5.00 EUR
Availability: InStock

Pattern #4791

An unlined, relaxed-fit women's coat with a stand collar, front and back yokes, side panels with in-seam pockets, two-piece set-in sleeves and a five-button front. Drafted to your own measurements. Recommended fabric: thin coating fabrics from natural or blended fibres that do not fray; neoprene.

Tech. Description

Relaxed Fit Stand Collar Coat

An unlined, relaxed-fit women's coat with a stand collar, front and back yokes, side panels with in-seam pockets, two-piece set-in sleeves and a five-button front.

When To Wear

Spring and early autumn, as a light coat over dresses or trousers and knitwear.
Day to day in town, worn open or buttoned.

Key Design Features

Silhouette: Straight and relaxed, shaped by side panels and bust darts.

Length: Upper thigh.

Collar: Two-layer stand collar, interfaced on the inner layer, set into the neckline.

Sleeves: Two-piece set-in sleeves with elbow and front seams, three-quarter length.

Front: Front yokes; bust darts below the yoke; a side panel on each side.

Closure: Five buttons with buttonholes on the right front; interfaced front facings.

Pockets: In-seam pockets in the seam between the front and the side panel.

Back: One-piece back yoke, centre back seam, side panels.

Finishing: Hem and sleeve hems turned up 3 cm and sewn by hand with blind stitches; thin raglan shoulder pads.

Lining: Unlined; front edges and neckline finished with facings.

Level Of Difficulty

Intermediate. Yokes, in-seam pockets, a stand collar, two-piece sleeves set into the armhole and buttonholes.

Fabric Recommendations

Thin coating fabrics from natural or blended fibres that do not fray; neoprene.

Additional Supplies

Fusible interfacing (inner collar stand, front facings, back neckline facing)
Thin raglan shoulder pads
5 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom of the garment and sleeve hem - 3.0 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Back yoke – 1 piece
- Back – 2 pieces
- Side – 2 pieces
- Front – 2 pieces
- Front yoke – 2 pieces
- Collar stand – 2 pieces
- Back neckline facing – 1 piece
- Front facing – 2 pieces
- Upper sleeve – 2 pieces
- Lower sleeve – 2 pieces
- Pocket bag – 4 pieces
From fusible interfacing: inner collar stand, front facing, back neckline facing.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

Fuse interfacing to the relevant pieces.
Stitch the center back seam, press allowances open. Attach the yoke to the back, press allowances towards the yoke.
Stitch the bust darts, press depths upwards. Attach the yoke to the front, press allowances towards the yoke. Attach pocket bags to the side and front.
Attach the side to the back, press allowances open. Attach the side to the front simultaneously with the pocket bag, press allowances open.
Stitch shoulder seams, press allowances towards the back.
Fold collar stand pieces right sides together and stitch the upper edge. Turn the collar stand right side out and press. Attach the collar stand to the neckline.
Stitch shoulder seams of front facings and neckline facing, press allowances open. Place front facings with the garment right sides together and stitch along the front edges and neckline. Clip allowances at curves, trim at corners. Turn front facings to the wrong side, straighten, press.
Stitch and press open the elbow and front sleeve seams. Set sleeves into armholes matching notches.
Press the bottom edge of the garment and sleeves to the wrong side and hem with blind stitches. Attach shoulder pads.
On the right front, make buttonholes; on the left front, sew on buttons.