Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4729
#4731

Long Sleeve Blouse with Notched Yoke

Pattern #4730

A women's hip-length pullover blouse with curved front and back yokes, a V-shaped notch at the centre of the front yoke and a back neck slit closed with a rouleau loop and one button. The yokes and sleeves are cut from a second fabric. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres, in matching or contrasting colours for the body and for the yokes and sleeves.

Tech. Description

Long Sleeve Blouse with Notched Yoke

A women's hip-length pullover blouse with curved front and back yokes, a V-shaped notch at the centre of the front yoke and a back neck slit closed with a rouleau loop and one button. The yokes and sleeves are cut from a second fabric.

When To Wear

  • At the office or for everyday wear, worn loose over trousers or a straight skirt.
  • In spring and autumn; in two coordinating or contrasting fabrics for a colour-blocked look.

Key Design Features

Silhouette: Straight, loose body with bust darts under the front yoke seam.

Length: Hip length, with a hem that curves up at the sides.

Neckline: Round, bound with a folded bias strip; the front yoke edges are turned in and topstitched to form a V notch at centre front.

Sleeves: Long, one-piece set-in sleeves with a turned and topstitched hem.

Closure: Slit in the centre back yoke seam, edge-stitched 0.1 cm, fastened with a bias rouleau loop and one button.

Back: Curved back yoke with a centre seam; back cut on the fold below the yoke.

Finishing: Yoke seams pressed towards the yoke on the back and towards the body on the front; hems 1.5 cm, turned and topstitched.

Level Of Difficulty

Intermediate. Curved yoke seams, a V notch in the yoke, a rouleau loop, bias-bound neckline and set-in sleeves.

Fabric Recommendations

Dress fabrics of natural or blended fibres, in matching or contrasting colours for the body and for the yokes and sleeves.

Additional Supplies

  • 1 button
  • Bias binding, 4 cm wide (or cut from the fabric)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; hem allowance for the bottom of the garment and sleeve hem - 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to consider paired and symmetrical parts).

  • From main fabric 1:
    • Back - 1 piece on fold
    • Front - 1 piece on fold
  • From main fabric 2:
    • Back yoke – 1 piece
    • Front yoke - 1 piece
    • Sleeve - 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Serge the center edges of the back yokes separately. Stitch the center seam of the yokes from the mark to the bottom edge, press seams open. Stitch along the slit at 0.1 cm.
  2. Attach the back yoke to the back. Press the seam allowance upwards and serge.
  3. Cut a bias strip 2.5 cm wide and 5 cm long for the loop. Fold the strip in half lengthwise, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out and straighten the rouleau. Adjust the loop length.
  4. Stitch the bust darts, press the fullness towards the center. Serge the center edges of the front yoke, press seam allowances to the wrong side and topstitch. Attach the front yoke to the front, press seam allowances downwards and serge.
  5. Stitch the shoulder seams, press seam allowances towards the back and serge.
  6. Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the neckline length + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Finish the neckline edge, inserting the loop.
  7. Serge the bottom edge of the back and front, press to the wrong side and topstitch.
  8. Stitch the side seams, press seam allowances towards the back and serge.
  9. Stitch the sleeve seam, press seam allowances towards the back and serge. Set the sleeves into the armholes, matching notches. Press seam allowances and serge. Serge the bottom edge of the sleeve, press seam allowance to the wrong side and topstitch.
  10. Sew on the button.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?