Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's above-the-knee dress in heavy knit fabric with a two-piece hood whose front ends cross right over left, long sleeves cut in one with the body, a kangaroo pocket on the front and folded bands at the cuffs and hem. Drafted to your own measurements. Recommended fabric: dense knit fabric of medium stretch, of natural or blended fibres.
A women's above-the-knee dress in heavy knit fabric with a two-piece hood whose front ends cross right over left, long sleeves cut in one with the body, a kangaroo pocket on the front and folded bands at the cuffs and hem.
Silhouette: Loose through the shoulders and bust, narrowing towards the hem band.
Length: Mid-thigh, above the knee.
Collar: Hood of two pieces with a centre seam; the outer edge is turned in by 2 cm and topstitched. The right end is lapped over the left at the front neck, and the hood is sewn to the neckline together with front and back neckline facings in one seam.
Sleeves: Long, cut in one with the front and back; the shoulder and upper sleeve seam, and the side and underarm seam, are sewn in one pass. Finished with cuffs sewn into a ring and folded in half.
Pockets: Kangaroo pocket, one piece, open at both sides: the side edges are turned in by 2 cm and topstitched, the lower edge is stitched to the front right sides together, then the pocket is turned up and topstitched along the upper line.
Back: Centre back seam; the front is cut on the fold.
Finishing: Hem band cut on the fold, sewn into a ring, folded lengthwise and stitched to the lower edge.
Beginner. Straight knit seams, a pocket topstitched in two passes, a hood set in with facings, and folded bands. Needs a stretch stitch or overlocker.
Dense knit fabric of medium stretch, of natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; hem allowance for side edges of pocket – 2 cm, allowance along the outer edge of the hood – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical details).
When stitching pieces, pay attention to the notches - they must match! Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

#4742
Hooded Dress with Side Pockets

#4587
Hooded Dress With Pockets

#4663
Denim Shirtdress with Rolled Sleeves

#4778
Asymmetrical Wrap Flared Dress
#4784
Inverted Pleat tunic

#4628
Loose Fit Short Dolman Sleeve Curved Hem Mini Dress

#4816
Drawstring Draped Neck Tunic with Handkerchief Hem

#4571
Long Sleeve Tunic Dress

Minerva Support
Online