Asymmetrical Collar Cuffed Sleeve Blouse

Name: Asymmetrical Collar Cuffed Sleeve Blouse
Brand: Minerva Patterns
SKU: 4689
Price: 5.00 EUR
Availability: InStock

Pattern #4689

A cropped, boxy women's blouse with short cut-on sleeves finished with turned-back cuffs and a wide folded collar whose ends overlap off-centre at the front. The front and back are each cut in one piece on the fold, with no fastenings. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.

Tech. Description

Asymmetrical Collar Cuffed Sleeve Blouse

When To Wear

In spring and summer with high-waisted trousers or skirts, since the blouse ends above the hip.
Over a fitted top or slip dress as a light cover-up in warm weather.

Key Design Features

Silhouette: Boxy and wide through the body, with bust darts on the front.

Length: Cropped, ending around the waist or just below it.

Collar: A wide band folded in half lengthwise, stitched at the short ends and set into the neckline; the collar ends overlap at the front, off-centre, matched to marks.

Sleeves: Short sleeves cut in one with the front and back, with dropped shoulders and a cuff sewn into a ring.

Front: One piece on the fold, pulled on over the head.

Back: One piece on the fold, with no centre back seam.

Finishing: Collar and cuffs interfaced; hem turned twice by 1 cm and topstitched.

Level Of Difficulty

Beginner. Four pattern pieces, darts, straight seams, cuffs sewn into rings and a folded collar; no closures.

Fabric Recommendations

Blouse fabrics of natural or blended fibres.

Additional Supplies

Fusible interfacing (collar, cuffs)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance – 2 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Front – 1 piece on fold
- Back – 1 piece on fold
- Cuff – 2 pieces
- Collar – 1 piece
From fusible interfacing:
- Cuff – 2 pieces
- Collar - 1 piece

Sewing Instructions

Fuse interfacing to the designated pieces.
Stitch darts on the front. Press dart allowances upwards.
Stitch shoulder and side seams, overlock allowances and press towards the back.
Fold the collar in half lengthwise, right sides together, and stitch the short edges. Turn the collar right side out and press. Overlap the collar corners, matching the marks. Place the collar on the blouse from the wrong side and stitch the collar. Overlock the allowance. Turn the collar to the right side, covering the stitching seam.
Stitch the cuff into a loop. Press allowances open. Attach the outer side of the cuff to the sleeve. Fold the allowance of the inner inwards and topstitch into the seam of the outer cuff attachment.
Fold the bottom edge of the garment twice by 1 cm and topstitch.