Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4682
#4684

V-Neck High-Low Blouse

Pattern #4683

A women's button-front blouse with a short V-slit at the neckline, three-quarter set-in sleeves and a high-low hem: the front is shorter with a curved lower edge, the back is longer and rounded. Drafted to your own measurements. Recommended fabric: blouse fabrics made from natural or blended fibres.

Tech. Description

V-Neck High-Low Blouse

A women's button-front blouse with a short V-slit at the neckline, three-quarter set-in sleeves and a high-low hem: the front is shorter with a curved lower edge, the back is longer and rounded.

When To Wear

  • With slim trousers or a straight skirt for the office.
  • Worn loose over jeans in spring and autumn.

Key Design Features

Silhouette: Relaxed, straight body.

Length: Below the hip; the back hem falls lower than the front.

Neckline: Collarless round neckline opening into a narrow V at the centre front, finished with interfaced front facings and a back neck facing.

Front: Two fronts with a four-button closure; buttonholes on the right front. Front darts run out to the lower edge and are finished together with it.

Sleeves: Three-quarter length, set-in, with a 2 cm turned-up hem.

Back: Centre back seam, curved hem.

Level Of Difficulty

Intermediate. Facings stitched along the front edges and neckline, darts, set-in sleeves and buttonholes.

Fabric Recommendations

Blouse fabrics made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front facings, back neck facing)
  • 4 buttons

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm; hem allowance for blouse bottom and sleeve – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

  • From main fabric:
    • Back – 2 pieces
    • Front – 2 pieces
    • Center Front Facing – 2 pieces
    • Sleeve – 2 pieces
    • Back Neckline Facing – 1 piece
  • From fusible interfacing:
    • Center Front Facing – 2 pieces
    • Back Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Center Front Facings and the Back Neckline Facing.
  2. Stitch the center back seam. Finish the seam allowance and press to the left side.
  3. Stitch shoulder and side seams, press allowances towards the back and finish.
  4. Stitch the Center Front Facings to the Back Neckline Facing at the shoulders. Press allowances open. Finish the outer edge. Place the facings on the garment right sides together and stitch along the front edges and the neckline; turn to the wrong side. Finish the lower edge of the center front section, fold it in and topstitch.
  5. Stitch the darts on the front; finish the dart edges together with the lower edge.
  6. Stitch the sleeve seam. Press allowance towards the back and finish.
  7. Set sleeves into armholes, press allowances and finish.
  8. Press the hem allowance of the bottom edge to the wrong side and topstitch.
  9. Make the buttonholes on the right front edge. Sew the buttons onto the left front to correspond.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?