Pattern

Name: Sewing Pattern #4562
Brand: Minerva Patterns
SKU: 4562
Price: 5.00 EUR
Availability: InStock

Pattern #4562

A women's loose T-shirt-style top in woven blouse fabric, with a round neckline finished with a facing, short set-in sleeves with turned-up cuffs, and a rounded flap on the left chest. Drafted to your own measurements. Recommended fabric: blouse fabrics in natural or blended fibres.

Tech. Description

Cuffed Sleeve T-shirt with Chest Flap

A women's loose T-shirt-style top in woven blouse fabric, with a round neckline finished with a facing, short set-in sleeves with turned-up cuffs, and a rounded flap on the left chest.

When To Wear

In summer with jeans, shorts or a skirt.
Under a cardigan or jacket in spring and autumn.

Key Design Features

Silhouette: Loose and straight; front and back each cut in one piece on the fold, with bust darts only where the bust measurement requires them.

Length: Hip length; the hem curves up at the sides, and the front is longer than the back.

Neckline: Round, finished with interfaced front and back facings tacked to the shoulder seam allowances.

Sleeves: Short sleeves set into open armholes and sewn with the side seams in one pass; each ends in an interfaced cuff that is folded in half and turned up onto the right side.

Pockets: A decorative rounded flap on the left chest, interfaced and edge-stitched 0.1 cm from the edge, stitched on, folded down and topstitched.

Closure: None; pulls over the head.

Finishing: Hem overlocked, turned up 1.2 cm and topstitched.

Level Of Difficulty

Beginner. Few pieces, a faced neckline, sleeves set flat before the side seams, a folded cuff and a lined flap.

Fabric Recommendations

Blouse fabrics in natural or blended fibres.

Additional Supplies

Fusible interfacing (cuffs, neckline facings, flap)

Cutter's Must

When stitching pieces, pay attention to the notches - they must match!

From main fabric:

Back – 1 piece on fold
Front – 1 piece on fold
Sleeve – 2 pieces
Cuff - 2 pieces
Back neckline facing – 1 piece
Front neckline facing – 1 piece
Flap – 2 pieces

From fusible interfacing:

Cuff - 2 pieces
Back neckline facing – 1 piece
Front neckline facing – 1 piece
Flap – 1 piece

Sewing Instructions

Fuse interfacing to the designated pieces.
Stitch bust darts (if provided by the entered bust circumference), press allowances upwards.
Stitch shoulder seams, press allowances towards the back and serge.
Stitch shoulder seams of neckline facings, press allowances open. Serge the outer edge. Place the facing on the garment right sides together and stitch the neckline edge. Clip allowances, turn the facing to the wrong side, smooth out, and press. Attach the facing to the shoulder seam allowances.
Place flap pieces right sides together and stitch along the outer contour. Clip allowances at curves, turn the flap to the right side, smooth out, and press. Topstitch 0.1 cm from the edge. Serge the raw edge of the flap. Attach the flap to the front, fold down, and topstitch.
Serge the bottom edge of the garment, press to the wrong side, and topstitch.
Set sleeves into open armholes, press allowances and serge. Stitch side seams simultaneously with sleeve seams, press allowances and serge.
Stitch cuff into a loop, press allowances open. Press the cuff lengthwise in half, right side out. Attach the cuff to the bottom of the sleeve, aligning it with the wrong side of the garment. Serge allowances, fold the cuff to the right side, and press.