Straight Dress Voluminous Cuffed Sleeves Pockets
A knee-length women's straight dress with long full sleeves gathered into narrow cuffs, small pleats at the wide neckline and pockets set into the front panel seams. Invisible zipper at the centre back.
When To Wear
- To the office in autumn and winter, with tights and closed shoes.
- For daytime events and dinners, with flat or heeled shoes.
Key Design Features
Silhouette: Straight, shaped by curved panel seams on the front and back that run from the armhole to the hem.
Length: Knee length.
Neckline: Wide round neckline with small pleats turned towards the shoulders, finished with a facing.
Sleeves: Long and full, cut in one with the front and back, joined by a seam along the top of the arm. The lower edge is gathered into a folded cuff.
Closure: Invisible zipper in the centre back seam.
Pockets: In-seam pockets in the front panel seams, with pocket stays cut in one with the side front and pocket bags in lining fabric.
Back: Centre back seam and two curved panel seams.
Finishing: Seams pressed open and overlocked; 1 cm stay tape from the neckline to the sleeve hem; hem turned up and sewn by hand with blind stitches.
Level Of Difficulty
Intermediate. Cut-on sleeves joined to the side panels at the armhole, in-seam pockets caught in a panel seam, an invisible zipper and a faced neckline with pleats.
Fabric Recommendations
Dress fabrics or low-stretch knits in natural or blended fibres.
Additional Supplies
- Lining fabric for the pocket bags
- Fusible interfacing (neckline facings, cuffs, pocket area, armhole corners)
- Invisible zipper
- Stay tape, 1 cm wide
Cutter's Must
From main fabric:
- 1. Back – 2 pieces
- 2. Side Back – 2 pieces
- 3. Front – 1 piece on fold
- 4. Side Front – 2 pieces
- 5. Back Neckline Facing – 2 pieces
- 6. Front Neckline Facing – 1 piece
- 7. Cuff – 2 pieces
From lining fabric:
From fusible interfacing:
- 1. Back Neckline Facing – 2 pieces
- 2. Front Neckline Facing – 1 piece
- 3. Cuff – 2 pieces
Sewing Instructions
- Fuse interfacing to the Back Neckline Facings, the Front Neckline Facing and the Cuffs. Fuse the pocket area on the Front and Side Front pieces, and the armhole area on the Side Fronts. Apply a 1 cm wide stay tape along the grain from the neckline to the bottom of the sleeve on the Front and Back pieces. Fuse the upper corners at the armholes on the Front and Back pieces.
- Stitch the Side Backs to the Back pieces. Press the seam allowances open and overlock. Clip into the corner on the Back at the start of the armhole. Stitch the lower armhole of the Side Back to the lower sleeve section of the Back. Press the seam towards the sleeve and overlock.
- Overlock the center back edge separately on each Back piece. Stitch the center back seam from the zipper mark to the hem, press the seam allowances open. Insert the invisible zipper.
- Stitch the Pocket Bags to the cut-on pocket stays. Press the seam allowances towards the Pocket Bag and overlock. Stitch the Side Fronts to the Front, catching the Pocket Bags in the seam at the same time. Clip the seam allowances of the Side Front at the ends of the pocket opening. Press the pocket stays towards the centre front, press the panel seam open and overlock. Clip into the corner on the Front at the start of the armhole. Stitch the lower armhole of the Side Front to the lower sleeve section of the Front. Press the seam towards the armhole and overlock.
- Stitch the upper sleeve seams. Press the seam allowances open and overlock. Stitch the underarm sleeve seams and the side seams in one continuous seam. Press the seam allowances open and overlock.
- Fold each Cuff into a ring, right sides together, and stitch. Press the seam open. Turn the Cuffs right side out, fold in half and press. Sew a row of stitches with a loosened thread along the bottom edge of each sleeve and pull up the gathers. Stitch the Cuffs to the sleeves, press the seam towards the sleeve and overlock.
- Stitch the shoulder seams of the neckline facings, press the seam allowances open. Overlock the outer edge. Fold and baste the pleats on the dress neckline (pleat depths turned towards the shoulder seams). Place the dress and the facing right sides together, matching the neckline edges. Fold the facing back 5 mm short of the edges of the invisible zipper and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin them to the neckline edge over the facing. Stitch the neckline edge. Clip the seam at the curves, turn the pieces right side out and press. Topstitch the seam allowances to the facing. Attach the facing to the zipper tape.
- Overlock the hem allowance of the dress, press it to the wrong side and hem with blind stitches.