Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4497
#4499

Sleeveless Dress With Floating Front Panels

Pattern #4498

A sleeveless women's dress with a round neckline and two floating front panels attached at the side seams and armholes, meeting in a V at the waist where they fasten with a fabric loop and one button, then open over the dress front below. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres, in two contrasting or related colours.

Tech. Description

Sleeveless Dress With Floating Front Panels

A sleeveless women's dress with a round neckline and two floating front panels attached at the side seams and armholes, meeting in a V at the waist where they fasten with a fabric loop and one button, then open over the dress front below.

When To Wear

  • For the office in spring and summer, alone or under a jacket.
  • For daytime events, with the panels in a contrast colour.

Key Design Features

Silhouette: Straight, slightly widening toward the hem; the front is shaped with darts and the back with princess seams.

Length: Above the knee.

Neckline: Round, finished with an all-in-one neck and armhole facing.

Sleeves: Sleeveless, armholes faced.

Front: One-piece front under two separate panels. The panels are hemmed along their outer edges, held together at the V by a bias-cut loop (from a 3 x 7 cm strip) and a button, and fall open below to show the front.

Back: Centre back seam with an invisible zipper; the side back panels are cut from the second fabric, like the front panels.

Finishing: 2 cm hem allowance on the dress and on the outer edges of the panels, overlocked and topstitched.

Level Of Difficulty

Intermediate. An invisible zipper, an all-in-one neck and armhole facing stitched in two steps, and layered front panels.

Fabric Recommendations

Dress fabrics in natural or blended fibres, in two contrasting or related colours.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (facings)
  • 1 button

Cutter's Must

From main fabric:

  • Back center - 2 pieces
  • Front - 1 piece
  • Back facing – 2 pieces
  • Front facing – 1 piece

From main fabric 1:

  • Back side - 2 pieces
  • Overlay - 2 pieces

From fusible interfacing:

  • Back facing – 2 pieces
  • Front facing – 1 piece

Sewing Instructions

  1. Fuse the facing pieces with fusible interfacing.
  2. Stitch the princess seams of the back, press seam allowances towards the center and overlock.
  3. Overlock the center seams of the back separately. Stitch the center seam of the back from the zipper mark to the bottom edge, press seam allowances open. Insert the zipper.
  4. Stitch the darts on the front, press depths upwards. Overlock the bottom edge of the front, press to the wrong side and topstitch.
  5. Overlock the outer edge of the overlay, press to the wrong side and topstitch. Place the overlay onto the front and secure along the side seam and armhole. Then treat the front as one piece.
  6. Stitch the side and shoulder seams, press seam allowances towards the back and overlock.
  7. Stitch the shoulder and side seams of the facings. Press seam allowances open. Overlock the center seams and the outer edge of the facing. Place the dress and facing right sides together and stitch the neckline. Clip seam allowances at curves, turn the facing out, straighten and press. Stitch the armhole in two steps: first the back, then the front. Clip seam allowances at curves, turn out, press. Secure the facing to the garment at the side seams. Attach the facing to the zipper tape.
  8. Overlock the bottom edge of the dress, press to the wrong side and topstitch.
  9. Cut a bias binding 3 cm wide and 7 cm long. Fold the strip in half lengthwise and stitch 0.3 cm from the fold. Trim seam allowances and turn the piece right side out. Adjust the loop length and sew to the right overlay. Sew a button to the left overlay.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?