Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4494
#4496

Fitted Dress with 3/4 Sleeves and Two Necklines

Pattern #4495

A fitted knee-length women's dress combining two fabrics: a lined lace bodice with a peplum and elbow-length set-in sleeves over a straight skirt. A folded collar band runs along a wide boat neckline at the front and a deep V at the back; a bow sits at one shoulder. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres with added elastane for the skirt, waistband, collar and bow; guipure lace with elastane for the bodice, peplum and sleeves.

Tech. Description

Fitted Dress with 3/4 Sleeves and Two Necklines

A fitted knee-length women's dress combining two fabrics: a lined lace bodice with a peplum and elbow-length set-in sleeves over a straight skirt. A folded collar band runs along a wide boat neckline at the front and a deep V at the back; a bow sits at one shoulder.

When To Wear

  • For daytime and evening celebrations, receptions and theatre.
  • As an occasion dress for a wedding guest, with court shoes and a clutch.

Key Design Features

Silhouette: Close-fitting, shaped with darts in the front, back and peplum pieces.

Length: To the knee.

Neckline: Wide boat neckline at the front, deep V-neckline at the back. A collar band folded in half lengthwise is set between the bodice and its lining.

Sleeves: Set-in, one-piece, ending around the elbow; the lower edges of the sleeves and peplum are left unfinished and are cut along the edge of the lace.

Waist: Waist seam with the peplum inserted, covered by a separate folded waistband.

Skirt: Straight; one-piece front and two-piece back.

Back: Centre back seam with an invisible zipper.

Finishing: Bow made from a lined rectangle and wrapped with a small 6 x 6 cm band, hand-sewn at the shoulder. Hem turned up and blind-stitched.

Lining: Upper bodice only.

Level Of Difficulty

Intermediate. Handling lace, a lined bodice with a collar set into the neckline seam, an inserted peplum, an applied waistband and an invisible zipper.

Fabric Recommendations

Dress fabrics in natural or blended fibres with added elastane for the skirt, waistband, collar and bow; guipure lace with elastane for the bodice, peplum and sleeves.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (collar, waistband)
  • Lining fabric for the upper bodice

Cutter's Must

From main fabric:

  • Back lower - 2 pieces
  • Front lower – 1 piece
  • Waistband – 1 piece
  • Collar – 1 piece
  • Bow — 1 piece

From main fabric1:

  • Back upper – 2 pieces
  • Front upper – 1 piece
  • Back peplum – 2 pieces
  • Front peplum — 1 piece
  • Sleeve - 2 pieces

From fusible interfacing:

  • Collar – 1 piece
  • Waistband — 1 piece
  • From lining fabric: upper front and upper back.

Attention! The lower edges of the sleeves and peplums are not finished. Pattern pieces should be placed at the selvedge of the fabric.

Sewing Instructions

  1. Fuse fusible interfacing to the corresponding pieces.
  2. Stitch darts on the back pieces. Press darts towards the center back seam. Stitch darts on the front pieces. Press darts towards the center. Stitch darts on the peplum pieces. Press darts towards the center of the front and back respectively.
  3. Stitch shoulder and side seam allowances on the upper pieces. Press seam allowances open. Stitch side seam allowances of the peplums. Overlock seam allowances and press towards the back. Stitch side seam allowances of the lower parts. Overlock seam allowances and press towards the back.
  4. Fold the collar in half lengthwise, right sides together, and stitch the ends. Trim seam allowances at the corners and turn right side out.
  5. Stitch darts on the lining pieces. Trim dart depths and press towards the center. Stitch side and shoulder seam allowances. Press seam allowances open. Stitch the neckline of the dress with the lining, inserting the collar between the main fabric and lining pieces. Clip seam allowances at curves, turn the lining to the inside. Secure the main fabric and lining at the lower edge and armhole edge. Then treat as one piece.
  6. Stitch the upper and lower parts of the dress, inserting the peplum. Overlock seam allowances and press upwards.
  7. Fold the waistband lengthwise, right sides together, and stitch along the long side. Turn the waistband right side out. Press, centering the seam. Place the waistband on the dress, covering the waist seam. Secure the waistband seam allowances to the center back seam.
  8. Overlock the center back seam allowances separately. Stitch the center back seam from the notch for the zipper to the hem. Press seam allowances open. Insert the zipper.
  9. Stitch the sleeve seam. Overlock seam allowances and press towards the back. Set in the sleeves according to the markings. Overlock seam allowances.
  10. Fold the bow piece right sides together and stitch along three sides, leaving an opening for turning. Trim seam allowances at the corners, turn the bow right side out, and press. Hand-stitch the opening closed. Cut a trim strip 6 x 6 cm. Stitch along one side and turn. Insert the bow into the trim strip and sew to the dress, according to the technical sketch.
  11. Overlock the hem seam allowances of the dress, press to the wrong side, and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?