Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4488
#4491

Boat Neck Cap Sleeve Asymmetrical Sheath Dress

Pattern #4490

A fitted knee-length women's sheath dress with short cap sleeves, a wide asymmetric boat neckline and a diagonal bodice panel that ends in a lined, pointed peplum over the left hip. Pressed pleats on the lower front, a vent in the front princess seam and an invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres with added elastane.

Tech. Description

Asymmetrical Overlay Sheath Dress

A fitted knee-length women's sheath dress with short cap sleeves, a wide asymmetric boat neckline and a diagonal bodice panel that ends in a lined, pointed peplum over the left hip. Pressed pleats on the lower front, a vent in the front princess seam and an invisible zipper at the centre back.

When To Wear

  • For the office and business meetings, with a jacket or cardigan over the cap sleeves.
  • For dinners, theatre and family celebrations in warm weather.

Key Design Features

Silhouette: Close-fitting sheath with a waist seam.

Length: About knee length.

Neckline: Wide boat neckline, asymmetric at the front where the diagonal panel crosses it; finished with the bodice lining, no facings.

Sleeves: Short set-in cap sleeves, hem turned 1.2 cm and topstitched.

Front: The upper front is cut in two parts. The upper right front, with a bust dart, crosses the bodice diagonally and continues below the waist into a pointed peplum, which is faced with peplum lining. Below the waist, pleats on the lower right front, pressed downwards, fan out from under the peplum.

Skirt: Lower front in two parts joined by a princess seam on the left, with a vent at the hem; the vent area is interfaced and its allowance (6 cm) is topstitched from the right side.

Back: Upper back cut asymmetrically in a right and a left part, with darts; two lower back pieces; centre back seam with an invisible zipper.

Finishing: Hem turned up 3 cm and sewn by hand with blind stitches; vent allowance tacked to the hem.

Lining: The bodice is lined (neckline and armholes are finished with the lining, the sleeve set between lining and main fabric); the peplum has its own lining; the skirt is unlined.

Level Of Difficulty

Intermediate. Asymmetric pieces that must be matched at marks, a lined peplum caught into the waist seam, pressed pleats, a vent in a princess seam, an invisible zipper and armholes finished with lining in two steps.

Fabric Recommendations

Dress fabrics made from natural or blended fibres with added elastane.

Additional Supplies

  • Invisible zipper
  • Lining fabric
  • Fusible interfacing (vent)

Cutter's Must

From main fabric:

  • Upper Right Back – 1 piece
  • Upper Left Back – 1 piece
  • Lower Back – 2 pieces
  • Upper Right Front – 1 piece
  • Upper Left Front – 1 piece
  • Lower Right Front – 1 piece
  • Lower Left Front – 1 piece
  • Sleeve – 2 pieces

From lining fabric:

  • Upper Back Lining – 2 pieces
  • Upper Right Front Lining – 1 piece
  • Upper Left Front Lining – 1 piece
  • Peplum Lining – 1 piece

Sewing Instructions

  1. Stitch the darts on the back pieces and press them towards the center back. Stitch the bust dart on the Upper Right Front and press the dart depth upwards.
  2. Fold and secure the pleats on the Lower Right Front (pleat depths directed downwards). On the Lower Left Front, trim 5 cm off along the vertical edge of the vent extension. Fuse interfacing to the vent area on the wrong side of both lower front pieces. On the right side, mark the princess seam line (vent fold line). On the left piece, press the vent along the fold line; on the right piece, press only the vent allowance (6 cm) to the wrong side. Align the pieces along the princess seam and baste them together at the upper edge of the vent. Overlock the princess seam edges of the lower front separately. Overlock the vent allowances. Stitch the princess seam from the upper edge to the vent corner. Clip into the corner of the vent allowance on the right piece. Press the seam and vent allowances and secure them from the right side with machine stitching.
  3. Stitch the princess seam of the upper front (Upper Right Front to Upper Left Front) from the armhole edge to the mark on the Upper Left Front. Press allowances towards the center and overlock.
  4. Stitch the left side seam of the upper part of the dress, press allowances towards the back and overlock.
  5. Overlock the upper edge of the Peplum Lining. Place the Peplum Lining on the peplum part of the upper dress, right sides together, and stitch along the side and lower edges. Trim allowances at corners, turn the lining to the wrong side, and press.
  6. Stitch the right side seam of the upper part of the dress, press allowances towards the back and overlock. Stitch the side seams of the lower dress, press allowances towards the back and overlock.
  7. Stitch the upper and lower parts of the dress (in the peplum area, the lower part of the dress is stitched to the Peplum Lining only). Press allowances upwards and overlock.
  8. Overlock the center back edges separately. Stitch the center back seam from the mark to the hem, press the allowances open. Insert the invisible zipper.
  9. Stitch the shoulder seams, press allowances towards the back and overlock.
  10. Overlock the lower sleeve edge allowance, fold inwards, and topstitch. Set the sleeve into the armhole.
  11. Stitch the darts, side, and princess seams of the lining, press allowances. Overlock the lower edge and center back edges. Place the lining and the dress right sides together and stitch the neckline. Stitch the armhole edges in two steps: first the back, then the front (the sleeve is positioned between the lining and the main fabric). Tack the lower edge of the bodice lining to the waist seam allowance to hold the peplum in place. Slip-stitch the center back lining allowances to the zipper tape.
  12. Overlock the hem allowance of the dress, press to the wrong side, and hem with blind stitches. Tack the vent allowance to the hem.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?