Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4487
#4490

Ruffled Faux Wrap Dress with Tie Waist

Pattern #4488

A women's below-knee dress with a crossover V-neck bodice and a wrapped skirt front, trimmed with double-layer ruffles: a ruffle collar along the neckline and over the shoulders, a cascade down the skirt overlap and a flounce at the hem. A separate tie belt is worn at the waist; the dress closes with a zipper in the left side seam. Drafted to your own measurements. Recommended fabric: double-sided, well-draping dress fabrics from natural or blended fibres.

Tech. Description

Ruffled Faux Wrap Dress with Tie Waist

A women's below-knee dress with a crossover V-neck bodice and a wrapped skirt front, trimmed with double-layer ruffles: a ruffle collar along the neckline and over the shoulders, a cascade down the skirt overlap and a flounce at the hem. A separate tie belt is worn at the waist; the dress closes with a zipper in the left side seam.

When To Wear

  • In summer, at garden parties, weddings and holidays.
  • With sandals or light heels, the belt tied in a bow at the side.

Key Design Features

Silhouette: Fitted bodice with darts, waist seam, skirt widening slightly to the hem.

Length: Below the knee.

Collar: Two-layer ruffle collar sewn from the waist up the front edges and round the back neck; it falls over the shoulders and forms a ruffle across the upper back.

Front: Crossover bodice, the left front set between the right front and the collar. The lower fronts are seamed together, with the right two-layer flounce caught into the seam to form a cascade.

Sleeves: Sleeveless; armholes finished with bias binding, covered by the collar ruffles.

Back: Upper back with darts, a waist seam and a two-layer flounce at the hem.

Closure: Concealed zipper in the left side seam.

Waist: Single-layer tie belt, its edges turned and topstitched or finished with a narrow rolled hem.

Finishing: Flounce and collar edges overlocked, turned 0.5 cm and topstitched.

Level Of Difficulty

Intermediate. Layered flounces, a ruffle collar set in stages around a crossover front, a side-seam zipper and bias-bound armholes.

Fabric Recommendations

Double-sided, well-draping dress fabrics from natural or blended fibres.

Additional Supplies

  • Concealed zipper
  • Bias binding, 4 cm wide (or cut from fabric), for the armholes

Cutter's Must

From main fabric:

  • 1. Upper back - 1 piece
  • 2. Lower back - 1 piece
  • 3. Back flounce_1 - 1 piece
  • 4. Back flounce_2 - 1 piece
  • 5. Left upper front - 1 piece
  • 6. Right upper front - 1 piece
  • 7. Left lower front - 1 piece
  • 8. Right lower front - 1 piece
  • 9. Left front flounce_1 - 1 piece
  • 10. Right front flounce_1 - 1 piece
  • 11. Left front flounce_2 - 1 piece
  • 12. Right front flounce_2 - 1 piece
  • 13. Left collar part_1 - 1 piece
  • 14. Right collar part_1 - 1 piece
  • 15. Left collar part_2 - 1 piece
  • 16. Right collar part_2 - 1 piece
  • 17. Belt – 1 piece

Sewing Instructions

  1. Stitch darts on upper back and front, press seam allowances towards the center.
  2. Overlock the lower edges of the back flounces and front flounces, press to the wrong side and topstitch. Place flounce_1 over flounce_2 and secure along the raw edges.
  3. Stitch the upper and lower back panels together, press seam allowances upwards and overlock. Attach the flounce to the back, press seam allowances upwards and overlock.
  4. Stitch the center seam of the collar, press seam allowances open and overlock. Overlock the outer edge, press to the wrong side and topstitch. Place collar_1 over collar_2 and secure along the inner edge.
  5. Stitch the shoulder seams of the upper back and front, press seam allowances towards the back and overlock.
  6. Place the collar right side to the wrong side of the dress and attach the left along the neckline edge to the center back, overlock seam allowances. Fold the left end to the right side and secure with the center edge of the front. Insert the left side of the front between the right front and the collar and stitch the remaining of the collar attachment seam from the center back to the waist. Overlock seam allowances. Fold back the right of the collar and secure with the waist edge.
  7. Attach the left flounce to the lower left front, press seam allowances upwards and overlock. Stitch the right lower front to the left, inserting the right flounce between them and continuing the seam to the side seam. Press and overlock seam allowances. Stitch the upper and lower front panels together, press seam allowances upwards and overlock.
  8. Overlock the left side seams separately on the back and front. Stitch the left side seams from the armhole to the upper notch and from the lower notch downwards, press seam allowances open, pressing the slit for the zipper. Insert the zipper. Stitch the right side seams, press seam allowances towards the back, overlock.
  9. Cut (if not pre-made) a bias binding 4 cm wide for armhole finishing. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip with the armhole edge right side together and stitch, fold the trim strip to the wrong side and topstitch along the fold onto the main piece.
  10. Overlock the belt piece along the contour, press seam allowances to the wrong side and topstitch. Or overlock along the contour with a narrow rolled hem.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?