Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4486
#4488

Mock Jacket Peplum Sheath Dress

Pattern #4487

A fitted knee-length women's sheath dress in two contrasting fabrics that looks like a cropped jacket worn over a dress. Open, collarless jacket fronts and a peplum are sewn into the dress; centre back vent and invisible zipper. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres in two contrasting colours: fabric 1 for the jacket part, sleeves, upper back and peplum, fabric 2 for the dress front and lower back.

Tech. Description

Mock Jacket Peplum Sheath Dress

A fitted knee-length women's sheath dress in two contrasting fabrics that looks like a cropped jacket worn over a dress. Open, collarless jacket fronts and a peplum are sewn into the dress; centre back vent and invisible zipper.

When To Wear

  • For the office and business meetings, worn with a narrow belt at the waist as on the drawing.
  • For daytime events in autumn and spring, when long sleeves are needed.

Key Design Features

Silhouette: Close-fitting sheath dress with a waist seam at the back and a peplum ending at the hip.

Length: About knee length.

Neckline: The dress front (fabric 2) has a square neckline, its upper edge turned under and topstitched. Above it, the jacket part (fabric 1) has a round neckline with a notch where it meets the front edges, finished with interfaced front and back neck facings.

Sleeves: Long one-piece set-in sleeves in fabric 1.

Front: The dress front is cut on the fold with waist darts and bust darts. The upper fronts (fabric 1), each with a bust dart, are laid over it and caught in at the armhole and side seam; their curved front edges stay open and do not fasten.

Waist: The peplum (fabric 1) is made of centre and side pieces joined by a princess seam; it is joined to the upper fronts and laid over the lower back, split at the centre back below a mark.

Back: Upper back in fabric 1 and lower back in fabric 2, both with darts, joined by a waist seam. Centre back seam with an invisible zipper and a vent at the hem; the vent area is interfaced, its allowance is 6 cm.

Finishing: Dress and sleeve hems turned up 2 cm and topstitched; lower edges of the peplum and upper fronts turned up 1.5 cm and topstitched.

Level Of Difficulty

Intermediate. Layering the jacket fronts and peplum over the dress, a faced neckline and front edge with corners, a back vent and an invisible zipper.

Fabric Recommendations

Dress fabrics made from natural or blended fibres in two contrasting colours: fabric 1 for the jacket part, sleeves, upper back and peplum, fabric 2 for the dress front and lower back.

Additional Supplies

  • Fusible interfacing (back neck facings, front facings, vent)
  • Invisible zipper
  • Belt (recommended, not part of the pattern)

Cutter's Must

From Main Fabric 1:

  • Upper Back – 2 pieces
  • Upper Front – 2 pieces
  • Center Peplum Piece – 2 pieces
  • Side Peplum – 2 pieces
  • Sleeve – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Center Front Facing – 2 pieces

From Main Fabric 2:

  • Lower Back – 2 pieces
  • Front – 1 piece (on fold)

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Center Front Facing – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facing and Center Front Facing pieces.
  2. Stitch the darts on the Upper Back and Lower Back pieces and press the dart depths towards the center back. Stitch the waist and bust darts on the Front; press the waist darts towards the center and the bust darts upwards. Stitch the bust darts on the Upper Front pieces and press them upwards.
  3. Stitch the Center Peplum Piece to the Side Peplum along the princess seam, press the seam allowances open and serge. Stitch the center back seam of the peplum from the mark to the lower edge, clip the seam allowances at the mark, press open and serge the lower part.
  4. On the left Lower Back, trim 5 cm off along the vertical edge of the vent extension. Fuse interfacing to the vent area on the wrong side of both Lower Back pieces. On the right side, mark the center seam line (vent fold line). On the left piece, press the vent along the fold line; on the right piece, press only the vent allowance (6 cm) to the wrong side. Align the pieces along the center seam and baste them together at the upper edge of the vent. Serge the vent allowances. Stitch the center back seam from the mark to the vent corner. Clip into the corner of the vent allowance on the right piece. Lay the peplum on the lower back, wrong side to right side, and baste along the edges.
  5. Stitch the Upper Back to the Lower Back, press the seam allowances upwards and serge. Press the center back seam allowances open and serge them together with the peplum edges; press the vent allowances and secure them from the right side with machine stitching. Insert the invisible zipper.
  6. Serge the upper edge of the Front, press it to the wrong side and topstitch. Lay the Upper Front pieces on the Front, wrong side to right side, and baste along the armhole edge and the side edge down to the mark.
  7. Stitch the peplum to the Upper Front from the mark to the lower edge, clip the seam allowances at the mark, press open and serge the lower part. Stitch the side seams of the dress, folding the peplum out of the way, press seam allowances towards the back and serge. Stitch the shoulder seams, press seam allowances towards the back and serge.
  8. Stitch the shoulder seams of the back neckline facing and front facing, press seam allowances open. Serge the outer edge. Place the facings on the jacket part (Upper Front and Upper Back), right sides together, and stitch the neckline, the front edges and the lower corner. Clip seam allowances at curves, trim at corners, turn to the right side and press. Secure the facing to the zipper tape and to the shoulder seams.
  9. Stitch the sleeve seam, press seam allowances towards the back and serge. Set the sleeves into the armholes, matching notches. Press and serge seam allowances.
  10. Serge the bottom edge of the dress and sleeve, press to the wrong side and topstitch. Serge the lower edges of the peplum and Upper Front, press the allowances to the wrong side and topstitch.

Tip: The dress is recommended to be worn with a belt (not included in the pattern).

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?