Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4485
#4487

Sweetheart Neck Peplum Pencil Dress

Pattern #4486

A fitted knee-length women's pencil dress in two contrasting fabrics: a bodice with a sweetheart-shaped centre front panel pleated under the bust, a wide waist inset and a peplum that opens at the centre front, over a skirt in the second fabric. Centre back vent and invisible zipper. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres in two contrasting colours: fabric 1 for the bodice, waist inset, sleeves and peplum, fabric 2 for the lower front and lower back.

Tech. Description

Sweetheart Neck Peplum Pencil Dress

A fitted knee-length women's pencil dress in two contrasting fabrics: a bodice with a sweetheart-shaped centre front panel pleated under the bust, a wide waist inset and a peplum that opens at the centre front, over a skirt in the second fabric. Centre back vent and invisible zipper.

When To Wear

  • For the office, business meetings and presentations.
  • For daytime celebrations and events in autumn, winter and spring.

Key Design Features

Silhouette: Close-fitting bodice and straight pencil skirt joined by a waist seam, with a peplum over the hips.

Length: About knee length.

Neckline: Sweetheart neckline on the centre front panel, finished with its own interfaced facing; the upper side fronts frame it from the shoulders down, and their inner neck edges and the back neckline are finished with front and back neck facings.

Sleeves: One-piece set-in sleeves, ending above the wrist on the drawing.

Front: Upper centre front with small pleats under the bust on each side, joined to two upper side fronts. Below it a wide front inset at the waist, then a lower front cut on the fold with darts.

Waist: The peplum is cut as two front and two back pieces; its centre front edges are turned under and topstitched and left open. It is basted over the lower dress and caught into the waist seam.

Back: Upper and lower back with darts, centre back seam with an invisible zipper and a vent at the hem; the vent area is interfaced and its allowance is 6 cm. The back peplum is split at the centre back below a mark.

Finishing: Dress and sleeve hems turned up 2 cm and topstitched; peplum hem turned up 1.5 cm and topstitched.

Level Of Difficulty

Intermediate. A faced sweetheart edge, pleats, several bodice pieces matched at the waist inset, a peplum caught into the waist seam, a back vent and an invisible zipper.

Fabric Recommendations

Dress fabrics made from natural or blended fibres in two contrasting colours: fabric 1 for the bodice, waist inset, sleeves and peplum, fabric 2 for the lower front and lower back.

Additional Supplies

  • Fusible interfacing (neck facings, sweetheart facing, vent)
  • Invisible zipper

Cutter's Must

From main fabric 1:

  • Upper Back – 2 pieces
  • Upper Center Front – 1 piece
  • Upper Side Front – 2 pieces
  • Front Inset – 1 piece
  • Sleeve – 2 pieces
  • Back Peplum – 2 pieces
  • Front Peplum – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Neckline Facing – 1 piece
  • Front Neckline Facing – 2 pieces

From main fabric 2 (contrast):

  • Lower Back – 2 pieces
  • Lower Front – 1 piece (cut on fold)

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Neckline Facing – 1 piece
  • Front Neckline Facing – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the corresponding pieces.
  2. Stitch the darts on the Upper Back and Lower Back pieces. Press the dart allowances towards the center back. Stitch the darts on the Lower Front. Press the dart allowances towards the center.
  3. Lay and secure the pleats on the Upper Center Front. Overlock the lower edge of the Neckline Facing. Place the Neckline Facing and the Upper Center Front right sides together and stitch along the upper (sweetheart) edge. Clip the seam allowances, turn the facing to the wrong side, ease out the edge, press, and baste it to the main piece along the raw edges.
  4. Stitch the Upper Side Front pieces to the Upper Center Front, press the seam allowances towards the center and overlock. Stitch the Front Inset to the lower edge of the upper front, press the seam allowances upwards and overlock.
  5. Stitch the side and shoulder seams of the upper part of the dress, press the seam allowances towards the back and overlock.
  6. Stitch the side seams of the Back Peplum and Front Peplum, press the seam allowances open and overlock. Overlock the lower edge and the center front edges of the Front Peplum pieces. Press the allowances of the center front edges to the wrong side and topstitch.
  7. Stitch the side seams of the Lower Front and Lower Back, press the seam allowances towards the back and overlock. Place the peplum on the lower part of the dress and baste along the upper edge.
  8. Stitch the upper and lower parts of the dress together. Press the seam allowances upwards and overlock.
  9. On the left Lower Back, trim 5 cm off along the vertical edge of the vent. On both Lower Back pieces, interface the vent area from the wrong side. On the right side, mark the center back seam line (vent fold line). Press the left vent extension along the fold line; on the right piece, press only the 6 cm vent allowance to the wrong side. Align the pieces along the center back seam and baste along the upper edge of the vent. Overlock the vent allowances. Stitch the center back seam of the Back Peplum from the mark to the lower edge, clip the seam allowances at the mark, press open and overlock in the lower part. Stitch the center back seam of the dress from the zipper mark to the corner of the vent. Clip the seam allowance at the vent corner on the right piece. Press the center back seam allowances open and overlock them together with the raw edges of the peplum; press the vent and secure it with a line of machine stitching from the right side. Insert the concealed zipper.
  10. Stitch the shoulder seams of the Back Neckline Facing and Front Neckline Facing, press the seam allowances open. Overlock the outer edges. Place the facings on the upper part of the dress right sides together and stitch around the neckline. Clip the seam allowances on curves, notch at the corners, turn to the wrong side and press. Tack the facing to the zipper tape and to the shoulder seams.
  11. Stitch the Sleeve seam, press the seam allowances towards the back and overlock. Set the sleeves into the armholes, matching the notches. Press and overlock the seam allowances.
  12. Overlock the lower edges of the dress and sleeves, press to the wrong side and topstitch. Press the hem allowance of the peplum to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?