Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4475
#4477

Pleated Gathered Front Dress with Sleeves

Pattern #4476

A fitted women's dress below the knee with a square neckline, short set-in sleeves and a wide waist insert between the bodice and the skirt. The front bodice is pleated at the neckline and gathered into the insert, with a small bow at the centre of the neckline. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Pleated Gathered Front Dress with Sleeves

A fitted women's dress below the knee with a square neckline, short set-in sleeves and a wide waist insert between the bodice and the skirt. The front bodice is pleated at the neckline and gathered into the insert, with a small bow at the centre of the neckline.

When To Wear

  • At the office or at daytime events in spring and summer.
  • For dinners and family celebrations, with court shoes.
  • Under a cropped jacket or cardigan in cooler weather.

Key Design Features

Silhouette: Close-fitting sheath shaped by darts in the bodice and skirt.

Length: Below the knee.

Neckline: Square, with soft pleats laid along the front neckline edge; finished with the bodice lining.

Sleeves: Short set-in sleeves with a stitched hem.

Front: Upper front cut in one piece, gathered at the lower edge between the notches and joined to a wide front insert. A bow, held by a 6 × 6 cm band, is sewn on at the neckline.

Back: Centre back seam the full length of the dress with a zipper from the neckline; darts in the upper and lower back; the waist insert is cut in two halves.

Skirt: Straight and narrow, with darts in the lower front and lower back; the lower front is cut on the fold.

Finishing: Overlocked seams; dress and sleeve hems turned up and topstitched.

Lining: Bodice lined above the insert; the lining edge is caught into the insert seam and hand-sewn to the zipper tape.

Level Of Difficulty

Intermediate. Pleats and gathers set into a seamed insert, an invisible zipper, a lined bodice and a bow with a band.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Invisible zipper

Cutter's Must

From main fabric:

  • Upper back – 2 pieces
  • Upper front — 1 piece
  • Back insert — 2 pieces
  • Front insert — 1 piece
  • Lower back — 2 pieces
  • Lower front — 1 piece on fold
  • Sleeve — 2 pieces
  • Bow — 1 piece
  • Bridge — 1 piece (6 x 6 cm)

From lining fabric:

  • Upper back – 2 pieces (cut according to upper pattern)
  • Upper front — 1 piece

Sewing Instructions

  1. Stitch darts on the upper and lower back pieces. Trim the bulk with an overlocker and press towards the center back. Attach the back insert to the lower, overlock the seam allowance and press upwards. Attach the upper. Overlock the seam allowance and press downwards. Overlock the center back raw edge separately on each piece. Stitch the center back raw edge from the zipper mark downwards. Press open the seam allowances, pressing the slit. Insert the zipper.
  2. Stitch darts on the lower front. Press the bulk towards the center. Attach the front insert to the lower. Overlock the seam allowance and press upwards. Along the neckline raw edge of the front, create arbitrary pleats and secure them. Along the lower raw edge of the upper front between the triangular notches, stitch with a loosened upper thread and gather. Attach the upper front to the insert. Overlock the seam allowance and press downwards.
  3. Stitch the side raw edges. Overlock the seam allowances and press towards the back. Stitch the shoulder raw edges. Press open the seam allowances.
  4. Stitch darts on the upper lining pieces. Stitch the shoulder and side raw edges of the lining. Press open the seam allowances. Overlock the lower raw edge. Place the lining on the dress with right sides together and stitch the neckline. Trim the seam allowances, clip corners, turn right side out and press. Align the edges of the lining and the main fabric along the armhole raw edge, and then treat as one piece. Stitch the lining to the zipper tape. Attach the lower raw edge of the lining into the seam of the upper attachment.
  5. Stitch the sleeve seam, press the seam allowances towards the back and overlock. Insert the sleeves into the armholes, aligning the notches. Press and overlock the seam allowances.
  6. Fold the bow piece right sides together and stitch along three sides, leaving an opening for turning. Clip the seam allowances at the corners, turn the bow right side out and press. Hand stitch the opening closed. Cut a bridge piece 6 x 6 cm. Stitch along one side and turn. Place the bow into the bridge and sew to the dress, according to the technical sketch.
  7. Overlock the lower raw edge of the dress and sleeve, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?