Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4425
#4427

Paneled Flounce Sleeve Sheath Dress

Pattern #4426

A fitted women's sheath dress of knee length in two contrasting fabrics: the angled front and back yokes, sleeves and sleeve flounces are cut from the second fabric. Princess seams front and back, an invisible zipper and a vent in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres in two contrasting colours: fabric 1 for the centre and side panels and facings, fabric 2 for the yokes, sleeves and flounces.

Tech. Description

Paneled Flounce Sleeve Dress

A fitted women's sheath dress of knee length in two contrasting fabrics: the angled front and back yokes, sleeves and sleeve flounces are cut from the second fabric. Princess seams front and back, an invisible zipper and a vent in the centre back seam.

When To Wear

  • For the office and daytime in spring and summer, with pumps.
  • For dinners and family celebrations, with heeled shoes.

Key Design Features

Silhouette: Fitted sheath shaped by princess seams running from the yoke seams to the hem.

Length: Knee length.

Neckline: Round, finished with interfaced front and back neckline facings tacked to the zipper tape and the shoulder seams.

Sleeves: Short set-in sleeves with a flounce joined at a seam above the elbow; flounce hem turned up 1.2 cm and topstitched.

Front: Centre front in one piece, side fronts joined by princess seams, and a front yoke set in at an angle from the neckline to the armhole.

Closure: Invisible zipper in the centre back seam.

Back: Centre back seam, princess seams and back yokes; an interfaced vent at the centre back hem, topstitched 1 cm on the right side and stitched across the top.

Finishing: Seams overlocked; 3 cm hem sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Princess seams, angled yoke seams, a centre back vent, an invisible zipper and flounced set-in sleeves.

Fabric Recommendations

Dress fabrics of natural or blended fibres in two contrasting colours: fabric 1 for the centre and side panels and facings, fabric 2 for the yokes, sleeves and flounces.

Additional Supplies

  • Fusible interfacing (neckline facings, vent)
  • Invisible zipper

Cutter's Must

From Main Fabric 1:

  • Side Back – 2 pieces
  • Center Back – 2 pieces
  • Side Front – 2 pieces
  • Center Front – 1 piece
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

From Main Fabric 2:

  • Back Yoke – 2 pieces
  • Front Yoke – 2 pieces
  • Sleeve – 2 pieces
  • Cuff (sleeve flounce) – 2 pieces

From Fusible Interfacing:

  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facing and Front Neckline Facing.
  2. On both Center Back pieces, fuse the vent on the wrong side. On the right side, mark the center seam line (vent fold line). Overlock the center back edge separately on each piece, overlocking the vent simultaneously. Stitch the center back seam from the zipper mark to the top of the vent. Clip the corner of the vent seam allowance on the right. Press open the center seam allowances. Press the right side of the vent 1 cm and topstitch. Press the vent allowances towards the center and secure them across the top with machine stitching. Insert the invisible zipper.
  3. Stitch the back princess seams, press allowances towards the center, and overlock. Attach the back yoke to the back, press allowances upwards, and overlock.
  4. Stitch the front princess seams, press allowances towards the center, and overlock. Attach the front yoke to the front, press allowances upwards, and overlock.
  5. Stitch the shoulder and side seams, press allowances towards the back and overlock.
  6. Stitch the shoulder seams of the facings, press allowances open, and overlock the outer edge. Place the facing and the garment right sides together and stitch the neckline edge. Clip the allowances, turn the facing to the wrong side and press. Attach the facing to the zipper tape and to the shoulder seams.
  7. Stitch the seam of the Cuff (flounce), press the allowances open and overlock. Stitch the sleeve seam, press the allowances and overlock. Stitch the flounce to the sleeve, press allowances towards the sleeve and overlock. Set the sleeves into the armholes, matching notches, press allowances and overlock. Overlock the lower edge of the flounce, press to the wrong side and topstitch.
  8. Overlock the hem allowance of the dress, press to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?