Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A fitted women's sheath dress of knee length in two contrasting fabrics: the angled front and back yokes, sleeves and sleeve flounces are cut from the second fabric. Princess seams front and back, an invisible zipper and a vent in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres in two contrasting colours: fabric 1 for the centre and side panels and facings, fabric 2 for the yokes, sleeves and flounces.
A fitted women's sheath dress of knee length in two contrasting fabrics: the angled front and back yokes, sleeves and sleeve flounces are cut from the second fabric. Princess seams front and back, an invisible zipper and a vent in the centre back seam.
Silhouette: Fitted sheath shaped by princess seams running from the yoke seams to the hem.
Length: Knee length.
Neckline: Round, finished with interfaced front and back neckline facings tacked to the zipper tape and the shoulder seams.
Sleeves: Short set-in sleeves with a flounce joined at a seam above the elbow; flounce hem turned up 1.2 cm and topstitched.
Front: Centre front in one piece, side fronts joined by princess seams, and a front yoke set in at an angle from the neckline to the armhole.
Closure: Invisible zipper in the centre back seam.
Back: Centre back seam, princess seams and back yokes; an interfaced vent at the centre back hem, topstitched 1 cm on the right side and stitched across the top.
Finishing: Seams overlocked; 3 cm hem sewn by hand with blind stitches.
Intermediate. Princess seams, angled yoke seams, a centre back vent, an invisible zipper and flounced set-in sleeves.
Dress fabrics of natural or blended fibres in two contrasting colours: fabric 1 for the centre and side panels and facings, fabric 2 for the yokes, sleeves and flounces.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; hem allowance of the dress – 3.0 cm, flounce hem – 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From Main Fabric 1:
From Main Fabric 2:
From Fusible Interfacing:

#4427
Stand Collar Gathered Yoke Sheath Dress

#4428
Lace Yoke Shift Dress with Keyhole

#4429
Paneled Yoke Dress with Princess Seams

#4422
Sleeveless Sheath Dress Notched Front

#4430
Two-Tone Overlay Dress with Back Tab

#4431
Fitted Double Gathered Dress with Cuffed Sleeves

#4432
A-Line Dress with V-Notch Neck and Contrast Trim
#4416
Pleated Bodice Cap Sleeve Dress

Minerva Support
Online