Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A fitted women's blouse of hip length with princess seams front and back, a cut-on button placket at the centre back with 7 buttons, short tulip sleeves of two overlapping parts and a contrast bow over a slit in the left front panel seam. Neckline, hem and sleeve edges are bound with contrast bias tape. Drafted to your own measurements. Recommended fabric: blouse fabric of natural or blended fibres, with a contrast fabric for the bow and strap.
A fitted women's blouse of hip length with princess seams front and back, a cut-on button placket at the centre back with 7 buttons, short tulip sleeves of two overlapping parts and a contrast bow over a slit in the left front panel seam. Neckline, hem and sleeve edges are bound with contrast bias tape.
Silhouette: Fitted, shaped by princess seams from the shoulder on the front and back.
Length: Hip length.
Neckline: Round, bound with contrast bias tape (no seam allowance on the neckline).
Sleeves: Short tulip sleeves: back and front sleeve parts with bound lower edges overlap at the marks and are joined along the cap before setting in.
Front: Centre front with separate left and right side fronts; the left panel seam is left open below a mark to form a bound slit at the hem, with a bow of contrast fabric wrapped by a strap stitched above it.
Closure: Centre back opening with a cut-on placket, buttonholes on the right side and 7 buttons on the left.
Back: Two centre back pieces and side backs joined by princess seams.
Finishing: Hem bound with bias tape (no hem allowance); seams overlocked.
Intermediate. Binding curved edges with bias tape, a slit worked into a panel seam, overlapping tulip sleeves, a cut-on placket with buttonholes and a made-up bow.
Blouse fabric of natural or blended fibres, with a contrast fabric for the bow and strap.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem allowance of the garment – 0 cm, at the back and front neckline edges – 0 cm; at the lower edges of the sleeve parts – 0 cm; other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From contrast fabric:

#4425
Sleeveless Overlap Top with Neck Flounce

#4421
Fitted Top with Front Peplum

#4420
Blouse with Round Neckline & V Keyhole

#4419
Princess Seam Top with Asymmetric Pleats

#4434
Pleated Blouse with Flutter Sleeves

#4435
Blouse with Front Pleats, Collar and Gathered Sleeves
#4439
Fitted Button-Front Lace Blouse

#4440
Pleated Neck Blouse

Minerva Support
Online