Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4402
#4404

V-Neck Pintucked Midriff Midi Dress

Pattern #4403

A sleeveless women's dress with a wide neckline cut into a narrow V-slit at the centre front, a separate midriff band with four horizontal pin-tucks, and long curved pleats on the front skirt. The bodice and midriff are lined. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, from natural or blended fibres.

Tech. Description

V-Neck Pintucked Midriff Midi Dress

A sleeveless women's dress with a wide neckline cut into a narrow V-slit at the centre front, a separate midriff band with four horizontal pin-tucks, and long curved pleats on the front skirt. The bodice and midriff are lined.

When To Wear

  • Summer weddings, receptions and evening dinners.
  • Warm-weather events, alone or with a light jacket or wrap over the shoulders.

Key Design Features

Silhouette: Fitted bodice and midriff, with a skirt that widens slightly towards the hem.

Length: Long skirt with a straight hem, turned up and topstitched.

Neckline: Wide, high neckline with a narrow vertical V-slit at the centre front, finished with the lining.

Sleeves: Sleeveless; the armholes are finished with the lining, stitched in two steps (back, then front).

Waist: Separate midriff pieces at the front and back, each with 4 horizontal pin-tucks 2 mm deep, spaced 2 cm apart. Upper front and back are shaped with darts below the bust and shoulder blades.

Skirt: The lower front is laid in pleats that fall from the midriff seam in long curved loops, basted along the upper edge; the lower back is shaped with darts.

Back: Centre back seam running the full length, with an invisible zipper from the neckline to the zipper mark.

Lining: Upper front, upper back and midriff are lined; the lining is slip-stitched to the zipper tape. The skirt is unlined.

Level Of Difficulty

Intermediate. Evenly spaced pin-tucks, pleats formed from marks, a neckline slit and armholes finished with the lining, and an invisible zipper.

Fabric Recommendations

Dress fabrics with good drape, from natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Invisible zipper

Cutter's Must

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Middle Back – 2 pieces
  • Middle Front – 1 piece

From lining fabric:

  • Upper Back – 2 pieces
  • Upper Front – 1 piece
  • Middle Front Lining – 1 piece
  • Middle Back Lining – 2 pieces

Sewing Instructions

  1. Stitch the darts on the Upper Back and Lower Back pieces, trim the dart depths to 1 cm and press towards the center.
  2. Stitch the darts on the Upper Front, trim the dart depths to 1 cm and press towards the center; press the lower darts towards the center front. On the Lower Front, fold the pleats. If necessary, slash the area marked with a wavy line. Baste the pleats along the upper edge.
  3. On the Middle Back and Middle Front pieces, stitch 4 horizontal pin-tucks on the wrong side, 2 cm apart; tuck depth 2 mm.
  4. Stitch the upper and lower front and back pieces to the Middle Front and Middle Back. Press the seam allowances towards the middle pieces.
  5. Serge the center back edges separately. Stitch the center back seam from the zipper mark to the hem, press the seam allowances open. Insert the invisible zipper.
  6. Stitch the shoulder seams and press the seam allowances open. Stitch the side seams. On the skirt, serge the seam allowances and press them towards the back; on the bodice, press them open.
  7. Stitch the darts on the front and back lining and attach the Middle Front Lining and Middle Back Lining. Serge the lower edge of the lining. Stitch the side and shoulder seams of the lining and press the seam allowances towards the back. Place the dress and the lining right sides together and stitch the neckline. Cut along the vertical neckline slit. Clip the seam allowances at the curves, turn the lining to the inside, roll the seam and press. Stitch each armhole in two steps: first the back, then the front. Clip the seam allowances at the curves, turn and press. Tack the lining to the dress at the side and lower (midriff) seam allowances. Slip-stitch the lining to the zipper tape.
  8. Serge the hem edge of the dress, press it to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?