Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4362
#4364

Short Sleeve Lace Yoke Dress

Pattern #4363

An A-line women's dress above the knee with a lace yoke across the front, a centre-front inverted pleat below the yoke, short set-in sleeves and an invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres for the dress, and lace for the front yoke.

Tech. Description

Short Sleeve Lace Yoke Dress

An A-line women's dress above the knee with a lace yoke across the front, a centre-front inverted pleat below the yoke, short set-in sleeves and an invisible zipper in the centre back seam.

When To Wear

  • In spring and summer, for daytime events, lunches and family celebrations.
  • At the office with a cardigan or a light jacket.

Key Design Features

Silhouette: A-line, flaring gradually from the bust to the hem.

Length: Just above the knee.

Neckline: Round neckline finished with interfaced facings.

Sleeves: Short set-in sleeves with a turned and topstitched hem.

Front: Front yoke cut from lace, seamed to the main front. Below it, an inverted pleat at the centre front is stitched down to a mark and then released.

Back: Centre back seam with an invisible zipper; waist darts and shoulder darts for shaping.

Finishing: Facings sewn to the zipper tape and the shoulder seams; hem blind-stitched by hand.

Level Of Difficulty

Intermediate. Joining lace to dress fabric, an inverted pleat, an invisible zipper finished with a facing, and set-in sleeves.

Fabric Recommendations

Dress fabrics of natural or blended fibres for the dress, and lace for the front yoke.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (neckline facings)

Cutter's Must

From main fabric:

  • Back - 2 pieces
  • Front - 1 piece
  • Sleeve - 2 pieces
  • Front neckline facing - 1 piece
  • Back neckline facing – 2 pieces

From lace fabric:

  • Front yoke - 1 piece
  • From fusible interfacing: back neckline facing, front neckline facing.

Sewing Instructions

  1. Fuse fusible interfacing to the designated pieces.
  2. Stitch the waist and shoulder darts on the back. Press the dart fullness towards the center.
  3. Serge the center edges of the back separately on each piece. Stitch the center edge of the back from the zipper mark to the bottom, press seam allowances open. Insert the zipper.
  4. Fold and stitch the inverted pleat on the front piece up to the mark. Attach the front yoke to the front, press seam allowances upwards and serge.
  5. Stitch the side and shoulder edges, press seam allowances towards the back and serge.
  6. Stitch the shoulder edges of the facings, press seam allowances open. Serge the outer edge. Place the dress and facing right sides together, aligning the neckline edges. Fold back the facing 5 mm from the edges of the concealed fastener and pin to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin to the neckline edge over the facing. Stitch the neckline edge, clip the seam allowances at curves, turn the pieces right side out and press. Secure the facing to the zipper tape and to the shoulder seams.
  7. Stitch the sleeve edge, press seam allowances and serge. Set the sleeves into the armholes, matching the notches. Press seam allowances and serge. Serge the lower edge of the sleeve, press the seam allowance to the wrong side and topstitch.
  8. Serge the hem allowance of the dress, press to the wrong side and hand stitch with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?