Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4361
#4363

Pleated Front Sheath Dress

Pattern #4362

A knee-length women's sheath dress with a horizontal waist seam, cut-on cap sleeves and asymmetric pleats: on the upper front they start at the shoulder near the neckline, on the lower front they gather at one hip. Lined bodice, invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres with added elastane.

Tech. Description

Pleated Front Sheath Dress

A knee-length women's sheath dress with a horizontal waist seam, cut-on cap sleeves and asymmetric pleats: on the upper front they start at the shoulder near the neckline, on the lower front they gather at one hip. Lined bodice, invisible zipper at the centre back.

When To Wear

  • At the office and for business meetings, with a jacket or cardigan in cooler weather.
  • For dinners and daytime events in spring and summer.

Key Design Features

Silhouette: Fitted sheath with a straight skirt and a waist seam at front and back.

Length: About knee length.

Neckline: Wide boat neckline, faced with the bodice lining.

Sleeves: Short cap sleeves cut in one with the bodice; armholes faced with the lining.

Front: Upper front with pleats folded in opposite directions at the shoulder and two darts below the bust stitched to 5 cm from the waist edge. Lower front with pleats at the side seam: the upper pleat folded down, the lower one up.

Back: Centre back seam with an invisible zipper, darts in the upper and lower back, shoulder seam eased onto the front.

Finishing: Waist seam pressed up; hem blind-stitched by hand.

Lining: Bodice lining (front and two upper backs), sewn to the zipper tape and to the waist seam allowances.

Level Of Difficulty

Intermediate. Placing asymmetric pleats, easing the back shoulder, facing the neckline and cut-on sleeves with the lining, and an invisible zipper.

Fabric Recommendations

Dress fabrics of natural or blended fibres with added elastane.

Additional Supplies

  • Invisible zipper
  • Lining fabric

Cutter's Must

From main fabric:

  • Upper back - 2 pieces
  • Lower back - 2 pieces
  • Upper front – 1 piece
  • Lower front - 1 piece

From lining fabric:

  • Front lining — 1 piece
  • Upper back — 2 pieces

Sewing Instructions

  1. Stitch darts on back pieces. Press darts towards the center seam. Stitch upper and lower back PANELs. Press seam upwards and serge. Serge center edges of the back separately. Stitch the center edge from the notches for the zipper to the bottom. Insert the zipper.
  2. Stitch darts on front pieces 5 cm from the bottom edge. Press dart depths towards the center. Form pleats on the upper front. Direct pleat depths away from each other. Form pleats on the lower front. Direct the depth of the upper pleat downwards, and the depth of the lower pleat upwards. Stitch the upper and lower front PANELs. Serge and press the seam allowances upwards.
  3. Stitch side and shoulder edges. Ease the shoulder seam on the back. If the fabric does not allow for easing, trim the excess from the armhole side. Press seam allowances open.
  4. Stitch shoulder and side edges of the lining. Press seam allowances open. Serge the bottom edge of the lining. Stitch the neckline with the lining, folding back the pleat depth. Turn the lining to the wrong side, clip and press the seam allowances. Stitch the armholes in two steps: first the front armhole, then the back armhole. Clip and press the seam allowances at curved sections. Sew the lining to the zipper tape and to the waist seam allowances.
  5. Serge the hem allowance of the dress, press to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?