Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4350
#4353

Draped Collar Sheath Dress Tie Waist

Pattern #4352

A women's sleeveless sheath dress with a waist seam and an asymmetric two-layer collar, gathered between markings so it falls in folds across the front. Armholes bound with bias binding, a separate tie belt and a concealed zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres that drape well.

Tech. Description

Draped Collar Sheath Dress

A women's sleeveless sheath dress with a waist seam and an asymmetric two-layer collar, gathered between markings so it falls in folds across the front. Armholes bound with bias binding, a separate tie belt and a concealed zipper in the left side seam.

When To Wear

  • For the office and daytime events in spring and summer, with a jacket over it in cooler weather.
  • For dinners and evenings out, with the tie belt knotted at the waist.

Key Design Features

Silhouette: Fitted sheath with a seam at the waist.

Length: To the knee.

Collar: Asymmetric collar made of right and left halves, each cut double and joined at the centre. It is gathered between the X marks; the right collar lies over the upper right front and the upper left front is joined to the collar, so the folds cross the front diagonally.

Sleeves: Sleeveless. Armholes finished with a 4 cm bias strip folded in half, turned to the inside and topstitched along the fold.

Front: Upper front in right and left pieces, with a dart on the upper left front. The lower front has a centre panel and two side panels.

Back: Upper and lower back joined at the waist, with darts and a centre back seam.

Closure: Concealed zipper in the left side seam.

Waist: Waist seam on the front and back; a separate self-fabric tie belt.

Finishing: Seams overlocked; hem turned up 3 cm and topstitched.

Level Of Difficulty

Intermediate. An asymmetric gathered collar set to matching marks, bias-bound armholes, a waist seam and a concealed side zipper.

Fabric Recommendations

Dress fabrics of natural or blended fibres that drape well.

Additional Supplies

  • Concealed zipper

Cutter's Must

Note: the labels on the pattern pieces are written on the right side of the fabric.

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Right Front – 1 piece
  • Upper Left Front – 1 piece
  • Lower Center Front – 1 piece
  • Lower Side Front – 2 pieces
  • Right Collar – 2 pieces
  • Left Collar – 2 pieces
  • Waistband (tie belt) – 1 piece

Sewing Instructions

  1. Stitch the darts on the back pieces, press the dart takes towards the centre. Stitch the Upper Back to the Lower Back. Overlock seam allowances and press upwards. Stitch the center back seam. Overlock seam allowance and press to the left side.
  2. Stitch the dart on the Upper Left Front. Cut the dart take open and overlock. Press the allowance towards the centre. Stitch the Lower Side Fronts to the Lower Center Front. Overlock seam allowances and press towards the center.
  3. Stitch shoulder seams. Press seam allowances open.
  4. Join the Right Collar and Left Collar along their centre seam, separately for the upper collar and the under collar, matching the notches. Press the allowances open. Place the upper and under collars right sides together and stitch along the edge marked with a zigzag. Turn the collar right side out and press. Between the “X”-shaped marks, stitch with a loosely tensioned upper thread and gather. Place the right collar on the Upper Right Front, lay the lower edge of the left collar on top and stitch from the left style seam to the mark. Clip seam allowances at the notch level. Overlock the collar attachment seam allowance. Stitch the upper collar to the back neckline and the front sections; on the left side, stitch only up to the “T”-shaped mark. Clip the allowances at the mark. Fold the under collar allowance inwards and topstitch into the seam. Stitch the Upper Left Front to the collar and to the Upper Right Front. Overlock seam allowance.
  5. Cut a bias binding 4 cm wide and a length equal to the armhole length + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the bias binding with the armhole edge on the right side, leaving tails, and stitch. Fold the bias binding to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
  6. Stitch the assembled lower front to the upper front. Overlock seam allowance and press downwards.
  7. Overlock the left side edges separately, stitch them from the mark downwards and press the allowances open. Insert the concealed zipper in the left side seam. Stitch the right side seam, press seam allowances towards the back and overlock.
  8. Overlock the hem seam allowance of the dress, press to the wrong side and topstitch.
  9. Fold the Waistband (tie belt) in half lengthwise, right sides together, and stitch along the long and short sides, leaving an opening for turning. Turn the belt right side out, press. Sew up the opening.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?