Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4352
#4354

Skirt with Decorative Back Insert

Pattern #4353

A women's straight knee-length skirt with diagonal three-part yokes at the front and back, darts stitched on the right side as visible tucks, a panelled front and a pleated back insert with four decorative buttons. Topstitched seams, invisible zipper in the right side seam. Drafted to your own measurements. Recommended fabric: thin suiting fabrics from natural or blended fibres.

Tech. Description

Skirt with Decorative Back Insert

A women's straight knee-length skirt with diagonal three-part yokes at the front and back, darts stitched on the right side as visible tucks, a panelled front and a pleated back insert with four decorative buttons. Topstitched seams, invisible zipper in the right side seam.

When To Wear

  • For the office with blouses, shirts and fitted jackets.
  • In autumn and spring with tights and ankle boots or pumps.

Key Design Features

Silhouette: Straight, close-fitting skirt.

Length: Knee length.

Waist: No waistband; the upper edge is finished with an interfaced facing, topstitched 0.2 cm from the seam on the facing side.

Front: Yoke of three diagonal bands, its darts stitched towards the right side and pressed down so they show as tucks. Below the yoke, a centre front seam and two side panels, all topstitched 0.5 cm from the seam.

Back: Yoke of three diagonal bands with the same right-side darts. Below it, a central insert of two pleat pieces joined by a centre seam and formed into pleats, topstitched from the yoke down to the slit mark; the pleats open below. Four decorative buttons along the centre seam of the insert.

Closure: Invisible zipper in the right side seam.

Finishing: Yoke and panel seams topstitched 0.5 cm from the seam; slit edges topstitched 0.1 cm from the edge; hem turned up 3 cm and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Many asymmetric pieces cut face up as marked, darts sewn to the right side, a pleated insert with a slit, even topstitching on every seam, a facing finished at the zipper.

Fabric Recommendations

Thin suiting fabrics from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front and back facings)
  • 1 invisible zipper
  • 4 decorative buttons

Cutter's Must

From main fabric:

  • Back yoke_1 – 1 piece
  • Back yoke_2 – 1 piece
  • Back yoke_3 – 1 piece
  • Lower left back – 1 piece
  • Lower right back – 1 piece
  • Left pleat – 1 piece
  • Right pleat – 1 piece
  • Front yoke_1 – 1 piece
  • Front yoke_2 – 1 piece
  • Front yoke_3 – 1 piece
  • Central left front – 1 piece
  • Central right front – 1 piece
  • Side left front – 1 piece
  • Side right front – 1 piece
  • Back facing – 1 piece
  • Front facing – 1 piece

From fusible interfacing:

  • Back facing – 1 piece
  • Front facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the respective pieces.
  2. Stitch darts on the right side of the back and front yoke pieces, press seam allowances downwards.
  3. Attach back yoke 1 to back yoke 2, press seam allowances upwards and serge. Topstitch along the seam at 0.5 cm. Attach back yoke 2 to back yoke 3, press seam allowances upwards and serge. Topstitch along the seam at 0.5 cm.
  4. Serge the center edges of the pleat pieces, stitch the center edge from the top edge to the slit mark. Press seam allowances open, pressing the slit. Topstitch the slit at 0.1 cm from the edge. Form pleats according to markings. Topstitch pleats from the top edge to the slit mark.
  5. Attach the pleat pieces to the lower back panels. Press seam allowances towards the side edges and serge. Topstitch along the seam at 0.5 cm. Attach the upper back to the lower back, press seam allowances upwards and serge. Topstitch along the seam at 0.5 cm.
  6. Attach front yoke 1 to front yoke 2, press seam allowances upwards and serge. Topstitch along the seam at 0.5 cm. Attach front yoke 2 to front yoke 3, press seam allowances upwards and serge. Topstitch along the seam at 0.5 cm.
  7. Stitch the center edge of the front skirt half, press seam allowances to the left side and serge. Topstitch along the seam at 0.5 cm. Attach the side front panels to the central front panels, press seam allowances towards the side edges and serge. Topstitch along the seams at 0.5 cm.
  8. Serge the right side edges separately on each piece. Stitch the right side seam from the zipper mark downwards. Press seam allowances open, pressing the slit for the fastener. Insert the zipper. Stitch the left side seam of the skirt. Press seam allowances towards the back and serge.
  9. Stitch and press open the right side seam of the facings. Serge the lower edge. Place the facing on the skirt right sides together and stitch the upper edge. Topstitch seam allowances onto the facing at 0.2 cm from the stitching line. Turn facings to the wrong side, press. Fold under the center edges and sew to the zipper tape. Secure the facing to the side seam allowances.
  10. Serge the lower edge of the skirt, press to the wrong side and hem with blind stitches.
  11. Sew buttons along the center pleat seam.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?