Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4333
#4335

Overlay Bow Sheath Dress

Pattern #4334

A knee-length women's dress for medium-stretch knit fabric in two colours, cut to look like an open jacket worn over a dress: trimmed front edges frame a centre panel, with a contrast waist band and a bow at the centre front. Short sleeves with a pleated hem and gathered cap. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric in two colours, of natural or blended fibres.

Tech. Description

Overlay Bow Sheath Dress

A knee-length women's dress for medium-stretch knit fabric in two colours, cut to look like an open jacket worn over a dress: trimmed front edges frame a centre panel, with a contrast waist band and a bow at the centre front. Short sleeves with a pleated hem and gathered cap.

When To Wear

  • For the office and daytime events in spring and summer.
  • As a dress that reads as a two-piece outfit, without needing a separate jacket.

Key Design Features

Silhouette: Fitted sheath with a waist seam and princess seams on the front bodice.

Length: Knee length, finished with a hem band cut 5.4 cm wide.

Neckline: Round neckline edged with contrast binding.

Sleeves: Short set-in sleeves, gathered at the cap, with a box pleat at the hem and a folded contrast trim.

Front: Upper and lower centre inserts trimmed with folded contrast strips across the top and bottom; folded strips along the front edges imitate the opening of a jacket.

Waist: Contrast waist band on the front and back; a separate bow is slipped through a narrow loop sewn into the front waist seam.

Back: Centre back seam; the contrast back waist band joins the upper and lower back.

Finishing: Seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker.

Level Of Difficulty

Intermediate. Many small panels and folded trim strips to align in knit fabric, a gathered sleeve cap with a pleated hem, binding and a bow assembled by hand.

Fabric Recommendations

Medium-stretch knit fabric in two colours, of natural or blended fibres.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

From main fabric:

  • Lower Back – 2 pieces
  • Upper Back – 2 pieces
  • Center Upper Front – 2 pieces
  • Side Upper Front – 2 pieces
  • Lower Front – 2 pieces
  • Upper Front Inset – 1 piece
  • Lower Front Inset – 1 piece
  • Sleeve – 2 pieces

From main fabric (second colour):

  • Front Inset – 1 piece
  • Back Inset – 1 piece
  • Sleeve Trimming – 2 pieces
  • Neckline Piping – 2 pieces
  • Upper Inset Trimming – 1 piece on fold
  • Lower Inset Trimming – 1 piece on fold
  • Bow – 1 piece
  • Strap – 1 piece
  • Upper Front Trimming – 2 pieces
  • Lower front vertical trim – 2 strips cut by measurement, 5.4 cm wide, length as marked on the Lower Front pattern
  • Hem trim – 1 strip cut by measurement, 5.4 cm wide, length as marked on the front pattern

Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. Alternatively, the pieces can be sewn directly on a 3- or 4-thread overlocker.

Sewing Instructions

  1. Stitch the center back seams of the Upper Back and the Lower Back. Overlock the seam allowances. Stitch the Back Inset to the Upper Back and the Lower Back. Overlock the seam allowances.
  2. Stitch the princess seams of the front (Center Upper Front to Side Upper Front). Overlock the seam allowances and press them towards the center. Fold the Upper Inset Trimming in half lengthwise and stitch it to the upper edge of the Upper Front Inset. Overlock the seam allowance. Fold the Lower Inset Trimming in half lengthwise and stitch it to the lower edge of the Lower Front Inset. Overlock the seam allowance.
  3. Stitch the shoulder seams. Overlock the seam allowances.
  4. Fold each Upper Front Trimming in half lengthwise, place it on the Upper Front Inset and baste along the edge. Stitch the Upper Front Inset with the trimming to the front edges of the Center Upper Front pieces. Fold the Neckline Piping right sides together and stitch along the inner edge and the two short ends. Turn right side out and press. Stitch the piping to the neckline.
  5. Cut a strip 5.4 cm wide, to the length marked on the Lower Front pattern (vertical trim). Fold the strip in half lengthwise right side out and topstitch it onto the Lower Front Inset. Stitch the Lower Front Inset to the Lower Front pieces. Overlock the seam allowances.
  6. Fold the Strap in half lengthwise right sides together and stitch. Turn right side out, placing the seam in the middle of the piece. Fold the Bow in half lengthwise and stitch along three sides, leaving an opening for turning. Trim the seam allowances and turn right side out. Close the opening with slip stitches.
  7. Stitch the Front Inset to the upper and lower front parts, inserting the Strap for the bow into the seam. Overlock the seam allowances.
  8. Form the box pleat on the Sleeve and baste it along the lower edge. Stitch along the sleeve cap between the circle marks with a loosened upper thread and gather. Fold the Sleeve Trimming right side out and stitch it to the lower edge of the Sleeve. Overlock the seam allowance. Set the Sleeve into the armhole.
  9. Stitch the side seam and the sleeve seam in one pass. Overlock the seam allowances.
  10. Cut the hem trim strip 5.4 cm wide, to the length marked on the front pattern (hem trim). Stitch the short ends of the trim. Stitch the trim to the lower edge. Overlock the seam allowance.
  11. Slip the Bow through the Strap.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?