Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4334
#4337

Short Wrap Skirt with Side Bow

Pattern #4335

A women's above-the-knee skirt with a shaped yoke instead of a waistband, a loose asymmetric overlay panel across the front and a tie that knots into a bow at the side. Closes with an invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: suiting fabrics with good drape, in natural or blended fibres.

Tech. Description

Short Wrap Skirt with Side Bow

A women's above-the-knee skirt with a shaped yoke instead of a waistband, a loose asymmetric overlay panel across the front and a tie that knots into a bow at the side. Closes with an invisible zipper in the centre back seam.

When To Wear

  • For office and daytime wear with a tucked-in blouse or a fitted top.
  • In spring and autumn with tights and ankle boots, or in summer with bare legs.

Key Design Features

Silhouette: Straight, slightly widening towards the hem, fitted at the hips.

Length: Above the knee.

Waist: Deep yoke at front and back, cut double: the outer yoke is interfaced, the inner yoke is understitched 0.1 cm from the seam and stitched in the ditch of the yoke seam.

Front: One-piece front under a free overlay panel with a diagonal lower edge. The overlay is caught in the side seam and its upper edge is stabilised with interfacing; its edges are folded under and topstitched.

Closure: Invisible zipper in the centre back seam; the yoke edges are hand-stitched to the zipper tape.

Back: Two back pieces with a centre back seam, and a yoke.

Finishing: A tie cut in two parts, one stitched to the skirt and one to the overlay at the marks, tied into a bow at the side. Hem pressed up and topstitched.

Level Of Difficulty

Intermediate. An invisible zipper, a faced yoke finished by stitching in the ditch, and an overlay panel set into the side seam.

Fabric Recommendations

Suiting fabrics with good drape, in natural or blended fibres.

Additional Supplies

  • Fusible interfacing (outer yokes, upper edge of the overlay panel)
  • 1 invisible zipper

Cutter's Must

From main fabric:

  • Back Skirt – 2 pieces
  • Back Yoke – 4 pieces
  • Front Skirt – 1 piece
  • Front Yoke – 2 pieces
  • Fly Piece (overlay) – 1 piece
  • Belt – 1 piece

From fusible interfacing:

  • Back Yoke – 2 pieces
  • Front Yoke – 1 piece

Sewing Instructions

  1. Fuse interfacing to the outer Front Yoke and Back Yokes. Fuse a strip of interfacing along the upper edge of the Fly Piece to prevent stretching. Serge the upper, outer and lower edges of the Fly Piece. Fold the seam allowances under and topstitch.
  2. Stitch the outer yokes to the Front Skirt and the Back Skirt pieces. Press the seam allowances open.
  3. Serge the centre back edges of each back piece separately. Stitch the centre back seam from the lower edge up to the zipper mark. Press the seam allowances open. Insert the invisible zipper.
  4. Place the Fly Piece right side up on the right side of the front and baste it along the side seam. Stitch the side seams. Serge the seam allowances and press them towards the back.
  5. Stitch the side seams of the inner yokes. Press the seam allowances open. Serge the lower edge of the inner yokes. Place the inner yoke on the outer yoke, right sides together, and stitch the upper edge. Clip the seam allowance. Understitch the seam allowances to the inner yoke 0.1 cm from the seam. Turn the inner yoke to the wrong side and press. Stitch the inner yoke in place by stitching in the ditch of the outer yoke seam. Hand-stitch the centre back edges of the yoke to the zipper tape.
  6. Cut the Belt into two equal parts. Fold each part right sides together and stitch along the two long edges and one short end. Trim the seam allowances at the corners and turn right side out. Press the ties. Stitch the ties on at the marks: one to the skirt and one to the Fly Piece.
  7. Serge the lower edge of the skirt, press the hem allowance to the wrong side, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?