Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4331
#4333

Cowl Neck Tunic with Drawstring and Pockets

Pattern #4332

A women's tunic for low to medium-stretch knit fabric with a deep folded tube collar that sits like a cowl, long set-in sleeves, an inside drawstring casing at the waist and two patch pockets with a buttonhole and button. Drafted to your own measurements. Recommended fabric: low to medium-stretch knit fabric of natural or blended fibres.

Tech. Description

Cowl Neck Tunic with Drawstring and Pockets

A women's tunic for low to medium-stretch knit fabric with a deep folded tube collar that sits like a cowl, long set-in sleeves, an inside drawstring casing at the waist and two patch pockets with a buttonhole and button.

When To Wear

  • In autumn and winter over leggings or slim trousers.
  • For casual days and travel: the drawstring adjusts the waist and the pockets are usable.

Key Design Features

Silhouette: Straight tunic gathered at the waist by a drawstring; bust darts on the front.

Length: Mid-thigh.

Collar: A tube collar stitched into a ring, folded in half lengthwise and stretched into the neckline; its seam sits at the left shoulder.

Sleeves: Long set-in sleeves, sewn in flat before the sleeve and side seams are closed in one pass.

Pockets: Two patch pockets on the lower front with a topstitched upper edge, each with a buttonhole and a button.

Waist: A casing topstitched on the inside 0.1 cm from the folds; a tie (about hip circumference + 30 cm long, 4 cm wide before folding) comes out through two buttonholes on the front.

Back: One piece cut on the fold.

Finishing: Seams sewn with a stretch or narrow zigzag stitch or on an overlocker; hems topstitched with a twin needle or on a coverstitch machine.

Level Of Difficulty

Beginner. Few pieces, a folded collar, patch pockets, a drawstring casing and buttonholes in knit fabric.

Fabric Recommendations

Low to medium-stretch knit fabric of natural or blended fibres.

Additional Supplies

  • 2 buttons

Cutter's Must

  • Back – 1 piece on fold
  • Front – 1 piece on fold
  • Sleeve – 2 pieces
  • Collar – 1 piece
  • Pocket – 2 pieces
  • Casing – 1 piece
  • Tie – 1 strip cut by measurement, about hip circumference + 30 cm long and 4 cm wide

Tip: Cut pieces from knit fabrics should be sewn with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also sew the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

  1. Stitch the darts on the Front, press the dart fullness upwards.
  2. Overlock the edges of each Pocket, press the upper allowance to the wrong side and topstitch. Work a buttonhole in the upper part of the pocket. Press the side and lower edges of the Pocket to the wrong side, place the pocket on the Front according to the markings and topstitch. Sew on the button.
  3. Stitch the shoulder seams of the Back and Front. Press the seams towards the back.
  4. Stitch the Collar into a ring, press the seam allowances. Fold the Collar in half lengthwise, right side out, and set it into the neckline, aligning the notches and stretching the collar edge to fit. The collar seam sits at the left shoulder seam. Press the collar seam.
  5. Set the Sleeves into the open armholes, aligning the notches. Press the seam allowances.
  6. Stitch the sleeve seam and the side seam in one pass. Press the seam allowances.
  7. Overlock the lower edge of the tunic and the lower edges of the Sleeves, fold to the wrong side, press and topstitch.
  8. Work two buttonholes on the Front for the tie. Stitch the Casing into a ring with a 1 cm seam. Press the long edges of the Casing to the wrong side by 1 cm. Place the Casing on the wrong side of the Front and Back according to the markings and topstitch 0.1 cm from the folds.
  9. Cut the Tie to the required length (about hip circumference + 30 cm) and 4 cm wide. Press the Tie in half lengthwise, right side out. Unfold and press the long edges towards the marked centre line. Fold the short ends inwards and topstitch the Tie 0.1 cm from the edge. Thread the Tie through the Casing.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?