Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4314
#4316

Short Sleeve Tie Neck Dress

Pattern #4315

A knee-length women's dress in knit fabric with short set-in sleeves, a stand collar whose long ends tie at one side of the front, and a horizontal waist band inserted between the bodice and skirt at front and back. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric in natural or blended fibres.

Tech. Description

Short Sleeve Tie Neck Dress

A knee-length women's dress in knit fabric with short set-in sleeves, a stand collar whose long ends tie at one side of the front, and a horizontal waist band inserted between the bodice and skirt at front and back.

When To Wear

  • To the office in spring and autumn, on its own or under a cardigan.
  • For daytime events with low-heeled shoes or pumps.

Key Design Features

Silhouette: Fitted, close to the body, cut for medium-stretch knit; bust darts on the front.

Length: Knee length.

Collar: Stand collar folded in half lengthwise, extended into long tie ends that are knotted at one side of the front; the front neckline between the notches is turned in and topstitched where the ties hang free.

Sleeves: Short set-in sleeves, set into the open armhole and sewn together with the side seam.

Waist: A separate waist insert joins the upper and lower parts at front and back.

Back: Centre back seam on the upper and lower back; no zip, the dress pulls on.

Finishing: Hem and sleeve hems turned up 2 cm and topstitched, preferably with a twin needle.

Level Of Difficulty

Intermediate. Sewing knit fabric with stretch stitches or an overlocker, matching a pieced waist insert, and setting a tie collar with clipped notches.

Fabric Recommendations

Medium-stretch knit fabric in natural or blended fibres.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment bottom and sleeve hem – 2 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. Note! Markings on the patterns are on the right side.

  • Upper Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Back – 2 pieces
  • Lower Front – 1 piece
  • Back Inset – 1 piece
  • Front Inset – 1 piece
  • Sleeve – 2 pieces
  • Collar – 2 pieces

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Stitch the darts on the Upper Front. Trim the dart depths with the overlocker. Stitch the Front Inset to the Upper Front and the Lower Front. Overlock the seam allowances.
  2. Stitch the centre back seams of the Upper Back pieces and of the Lower Back pieces. Overlock the seam allowances. Stitch the Back Inset to the Upper Back and the Lower Back. Overlock the seam allowances and press them downwards.
  3. Stitch the shoulder seams. Overlock the seam allowances and press them towards the back. Set the sleeves into the open armholes.
  4. Stitch the side seams, continuing into the sleeve seam in one pass. Overlock the seam allowances.
  5. Clip the seam allowance of the front neckline. Overlock the section between the notches, fold it to the inside and topstitch.
  6. Clip the seam allowance of the Collar at the large notches. Fold the Collar in half lengthwise and stitch the corners and the straight sections up to the large notches. Turn the Collar right side out and press. Set the Collar into the neckline.
  7. Overlock the bottom edge of the garment and the sleeve hems. Fold to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?