Short Sleeve Tie Neck Dress

Sewing Instructions

1. Stitch the darts on the FRONT PANEL. Trim the bulk with an overlocker. Attach the insert to the upper and lower parts of the FRONT PANEL. Overlock the SEAM ALLOWANCES.
2. Stitch the center seams on the upper and lower parts of the BACK PANEL. Overlock the SEAM ALLOWANCES. Attach the BACK PANEL insert to the upper and lower parts of the BACK PANEL. Overlock the SEAM ALLOWANCES and press them downwards.
3. Stitch the shoulder seams. Overlock the SEAM ALLOWANCES and press them towards the BACK PANEL. Set the SLEEVE into the open armhole.
4. Stitch the side seam and the SLEEVE seam simultaneously. Overlock the SEAM ALLOWANCES.
5. Clip the SEAM ALLOWANCES on the FRONT PANEL neckline. Overlock the section between the NOTCHES, fold inwards, and topstitch.
6. Clip the SEAM ALLOWANCES on the COLLAR along the large NOTCHES. Fold the COLLAR in half lengthwise and stitch the corners and straight sections up to the large NOTCHES. Turn the COLLAR right side out and press. Set the COLLAR into the neckline.
7. Overlock the bottom edge of the garment and the bottom edge of the SLEEVE. Fold to the wrong side, press, and topstitch.