Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4310
#4312

Fitted Sleeveless Dress With Flounces And Bias Trim

Pattern #4311

A women's sleeveless knee-length sheath dress with curved princess seams piped in contrast bias, two layered flounces sweeping diagonally across the front from a bias bow at the neckline, and bias-bound edges. Drafted to your own measurements. Recommended fabric: silk dress fabrics of natural or blended fibres.

Tech. Description

Fitted Sleeveless Dress With Flounces And Bias Trim

A women's sleeveless knee-length sheath dress with curved princess seams piped in contrast bias, two layered flounces sweeping diagonally across the front from a bias bow at the neckline, and bias-bound edges.

When To Wear

  • In summer for daytime events, dinners and the office, under a jacket or cardigan.
  • With a thin belt in the colour of the bias trim.

Key Design Features

Silhouette: Fitted, shaped by curved princess seams at the front and back and by shoulder darts at the back.

Length: Knee length.

Neckline: Round, bound with bias binding, with a small bias bow sewn at the front neckline.

Front: Centre front and side front panels. An upper and a lower flounce, each edged with bias binding, are layered and run from the neckline across the front to the side.

Armholes: Finished with a folded bias strip turned to the inside and topstitched.

Back: Centre back seam with a slit at the hem, edge-stitched 0.1 cm from the edge; piped princess seams.

Closure: Invisible zipper in the left side seam.

Finishing: Hem bound with bias binding; contrast piping in all princess seams.

Level Of Difficulty

Intermediate. Piping set into curved princess seams, bias binding on many edges, layered flounces and an invisible zipper.

Fabric Recommendations

Silk dress fabrics of natural or blended fibres.

Additional Supplies

  • Bias binding in a contrast colour
  • Invisible zipper
  • Thin belt to match the bias binding (to wear)

Cutter's Must

From main fabric:

  • 1. Center back - 2 pieces
  • 2. Side back - 2 pieces
  • 3. Side front – 2 pieces
  • 4. Center front - 1 piece
  • 5. Upper flounce - 1 piece
  • 6. Lower flounce - 1 piece

Sewing Instructions

  1. Stitch the shoulder darts on the center back. Press the dart excess towards the center seam.
  2. Stitch the princess seams of the back, inserting the bias binding, pressed in half lengthwise, between the pieces. Press seam allowances towards the center and serge.
  3. Serge the center seam of the back separately on each piece, simultaneously serging the slit allowance. Stitch the center seam of the back from the top to the slit mark, press seam allowances open, pressing the slit. Stitch a decorative and securing stitch along the slit 0.1 cm from the edge.
  4. Stitch the princess seams of the front, inserting the bias binding, pressed in half lengthwise, between the pieces. Press seam allowances towards the center and serge.
  5. Bind the lower edges of the flounces with bias binding. Serge the upper edge of the lower flounce. Place the upper flounce on the lower flounce and topstitch into the binding seam. Place the flounce on the front, secure along the edges, and treat as one piece thereafter.
  6. Stitch the right shoulder seam, press seam allowances towards the back and serge. Bind the neckline with bias binding. Stitch the left shoulder seam, press seam allowances towards the back and serge.
  7. Press the bias binding open. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip with the armhole edge on the right side and stitch. Clip the seam allowances. Fold the trim strip to the wrong side and topstitch along the fold to the main piece. Press the seam.
  8. Serge the left side seams separately. Stitch the left side seam from the zipper mark downwards, press seam allowances open, pressing the zipper slit. Insert the zipper. Stitch the right side seam, press seam allowances towards the back and serge.
  9. Bind the lower edge of the dress with bias binding.
  10. Create a bow from bias binding and sew it to the neckline of the front.

Tip: The dress is recommended to be worn with a thin belt matching the bias binding.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?