Panelled Sheath Dress
A women's knee-length sheath dress with princess seams, a jacquard centre front panel, a front yoke in a second fabric with jacquard insets at the shoulders, three-quarter sleeves and a back vent with an invisible zipper.
When To Wear
- For the office and business meetings, on its own or under a jacket.
- For dinners and daytime events in autumn and winter.
Key Design Features
Silhouette: Close-fitting sheath shaped by princess seams at the front and back.
Length: Knee length.
Neckline: Wide round neckline formed by a front yoke in a second fabric. At each side of the neck a double-layer jacquard inset is set into the neckline between the yoke pieces. Front and back necklines are finished with interfaced facings.
Front: Centre front panel in jacquard between plain side fronts; the yoke is cut in three pieces.
Sleeves: Three-quarter-length one-piece set-in sleeves, hem turned up and topstitched.
Back: Centre back seam with an invisible zipper and a vent lapped to the left; princess seams.
Finishing: Seams serged; dress hem turned up 3 cm and hand-hemmed with blind stitches.
Level Of Difficulty
Intermediate. Joining three fabrics in princess seams and a pieced yoke, insets set into the neckline under a facing, an invisible zipper and a back vent.
Fabric Recommendations
Dress fabrics of natural or blended fibres; a contrast or companion fabric for the yoke; jacquard for the centre front panel and the neckline insets.
Additional Supplies
- Invisible zipper
- Fusible interfacing (neckline insets, front and back neck facings, back vent)
Cutter's Must
From main fabric_1:
- 1. Back center - 2 pieces
- 2. Back side - 2 pieces
- 3. Front side - 2 pieces
- 4. Sleeve — 2 pieces
- 5. Collar - 2 pieces
- 6. Back neck facing – 2 pieces
From main fabric_2:
- 1. Front yoke_1- 1 piece
- 2. Front yoke_2- 2 pieces
- 3. Front neck facing – 1 piece
From jacquard fabric:
- 1. Front center - 1 piece
- 2. Collar - 2 pieces
From fusible interfacing:
- 1. Collar - 2 pieces
- 2. Front neck facing – 1 piece
- 3. Back neck facing – 2 pieces
Sewing Instructions
- Fuse interfacing to relevant pieces.
- Stitch the back princess seams, press seam allowances towards the center, serge.
- On both back pieces, fuse the vent from the wrong side. Serge the center edges separately on each piece. On the right side, mark the center seam line (vent fold line). Stitch the center back edge from the zipper mark to the vent corner. Clip the vent seam allowance corner. Press the center seam seam allowances open, pressing the zipper opening, press the vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent seam allowances along the top with a machine stitch. Insert the zipper.
- Stitch the front princess seams, be sure to clip the seam allowances, press towards the center, and serge.
- Attach front yoke_1 to the front, press seam allowances towards the yoke and serge.
- Place collar pieces right sides together in pairs and stitch the outer edges. Trim seam allowances at corners, turn collars right side out, press. Attach the collar to the neckline between the mark and the corner. Place the front neck facing onto the front (collar is between the main fabric and the facing) and stitch the neckline edge. Clip seam allowances, turn facing to the wrong side, press.
- Attach front yoke_2 with one seam to the collar and front yoke_1. Press seam allowances towards the armhole, serge.
- Stitch the side seams, press seam allowances towards the back and serge.
- Serge the outer edge of the back neck FACINGs. Place the dress with the facing right sides together, aligning the neckline edges. Before reaching 5 mm from the edges of the concealed closure, fold back the facing and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin to the neckline edge over the facing. Stitch the neckline edge, starting and ending the stitch exactly at the marked shoulder seam line. Clip seam allowances at curves, turn pieces out and press. Secure the facing to the zipper tape.
- Stitch the shoulder seams, inserting the front between the back and the back facing. Press seam allowances, serge. Turn the facing to the wrong side.
- Stitch the sleeve edge, press seam allowances and serge. Set sleeves into the armhole, matching notches. Press seam allowances and serge. Serge the lower sleeve edge, press seam allowances to the wrong side and topstitch.
- Serge the hem allowance of the dress, press to the wrong side and hem with blind stitches.