Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's pull-on blouse with soft pleats at the round neckline front and back, a waist band, a two-tier peplum and long sleeves gathered into buttoned cuffs. Worn with a separate tie belt. Drafted to your own measurements. Recommended fabric: silk stretch satin.
A women's pull-on blouse with soft pleats at the round neckline front and back, a waist band, a two-tier peplum and long sleeves gathered into buttoned cuffs. Worn with a separate tie belt.
Silhouette: Bodice fitted into a waist band, with two layered peplums below it; hip length.
Neckline: Round neckline with soft pleats on the front and back, turned towards the shoulder seams; finished with interfaced front and back facings.
Sleeves: Long set-in sleeves with a gathered sleeve cap. The wrist opening is bound with a 4 cm bias strip and the lower edge is gathered into an interfaced cuff with one button and buttonhole.
Front: Front and back each cut in one piece on the fold, with no fastening; the blouse goes on over the head.
Waist: A separate band (front and back inserts) joins the bodice to the peplums. A self-fabric tie belt, sewn from two pieces or one piece on the fold, ties in a bow.
Back: Same construction as the front: pleated neckline, waist band and two peplums.
Finishing: Upper and lower peplums cut on the fold, hems turned up 1 cm and topstitched; the two layers are basted together at the top and joined to the band in one seam.
Intermediate. Bound sleeve openings, gathered sleeve caps, cuffs with buttonholes and two peplum layers sewn in one seam, all in slippery stretch satin.
Silk stretch satin.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
From main fabric:
From fusible interfacing:

#4249
Collared Shirt with Shaped Placket

#4246
Color Block Batwing Sleeve Top

#4260
Sleeveless Gathered Front Neckline Blouse

#4245
Crossover Neck Jersey Top

#4261
Fitted Flounce Blouse

#4239
V-Neck Blouse with Flounce Sleeves & Peplum

#4267
Sleeveless Front Ruffle Blouse

#4238
Chiffon Blouse with Flounce and Belt

Minerva Support
Online