Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4251
#4253

Stretch Dress with Placket and Belt

Pattern #4252

A knee-length women's dress in stretch woven fabric with a wrap-effect V-neck bodice gathered at the waist, a folded band set along the V, short cap sleeves and belt loops at the waist seam. Concealed zip in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics from natural or blended fibres with added elastane.

Tech. Description

Stretch Dress with Placket and Belt

A knee-length women's dress in stretch woven fabric with a wrap-effect V-neck bodice gathered at the waist, a folded band set along the V, short cap sleeves and belt loops at the waist seam. Concealed zip in the left side seam.

When To Wear

  • In spring and summer for the office and daytime events.
  • With a narrow belt 1.5–2 cm wide threaded through the loops.

Key Design Features

Silhouette: Fitted, with a waist seam; the skirt is straight to the knee.

Length: Knee length.

Neckline: Deep V formed by two upper fronts, the right lapped over the left; a folded, interfaced band is caught into the facing seam along each side of the V.

Front: Upper fronts gathered along the lower edge between marks; one-piece lower front with darts.

Sleeves: Short cap sleeves with a single seam, set into the armhole.

Waist: Waist seam with belt loops, sewn into the seam at the front and back.

Back: Princess seams on the bodice and skirt and a centre back seam.

Closure: Concealed zip in the left side seam.

Finishing: Neckline finished with interfaced facings; dress and sleeve hems turned up and topstitched.

Level Of Difficulty

Intermediate. A lapped and gathered wrap bodice, bands set into the neckline facing seam, princess seams, belt loops in the waist seam and a concealed side zip.

Fabric Recommendations

Dress fabrics from natural or blended fibres with added elastane.

Additional Supplies

  • Concealed zip
  • Fusible interfacing (neckline facings, bands)
  • Belt 1.5–2 cm wide (worn with the dress)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance for the dress – 2 cm, sleeve hem – 1.5 cm, upper and lower belt loop allowance – 0 cm, other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Upper Front – 2 pieces
  • Lower Front – 1 piece
  • Upper Side Back – 2 pieces
  • Upper Center Back – 2 pieces
  • Lower Side Back – 2 pieces
  • Lower Center Back – 2 pieces
  • Placket – 2 pieces
  • Sleeve – 2 pieces
  • Front Facing – 2 pieces
  • Back Facing – 1 piece
  • Belt-Loop – 1 piece

From fusible interfacing:

  • Back Facing – 1 piece
  • Front Facing – 2 pieces
  • Placket – 2 pieces

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the Front Facings, the Back Facing and the Plackets.
  2. Fold each Placket lengthwise in half, right sides together, and stitch across the upper corner. Turn the placket right side out and press.
  3. Fold the Belt-Loop strip lengthwise in half and stitch the long raw edges. Turn it right side out, press, and cut it into the required number of belt loops.
  4. Stitch the princess seams of the upper back (Upper Center Back to Upper Side Back). Finish the seam allowances and press them towards the centre. Stitch the centre back seam. Finish the allowance and press it to the left side.
  5. Stitch the darts on the Lower Front. Press the darts towards the centre. Stitch the princess seams of the lower back (Lower Center Back to Lower Side Back). Finish the seam allowances and press them towards the centre. Stitch the centre back seam. Press the allowance to the left side.
  6. Stitch the shoulder seams of the Upper Fronts and the upper back. Finish the seam allowances and press them towards the back.
  7. Stitch the shoulder seams of the facings. Press the seam allowances open. Finish the outer edge of the facings. Place the facings on the neckline, right sides together, and stitch, inserting the plackets. Turn the facings to the wrong side and press.
  8. Along the lower edge of each Upper Front, sew a line of stitching with a loosened upper thread and gather between the straight marks. Lap the right upper front over the left and baste them together along the lower edge.
  9. Place the lower end of a belt loop on the lower edge of the upper back and stitch it 1 cm from the seam line. Fold the free end of the belt loop down and tack it to the seam allowance, aligning the raw edges. Attach the belt loops to the upper front in the same way.
  10. Stitch the upper back to the lower back and the upper front to the Lower Front. Finish the seam allowances and press them downwards.
  11. Stitch and finish the right side seam and press it towards the back. Finish the edges of the left side seam separately. On the left side, stitch the section below the armhole and the section from the hem up to the zipper mark. Press the seam allowance open. Insert the concealed zipper.
  12. Stitch the sleeve seam. Finish the seam allowance and press it towards the back. Set the sleeve into the armhole, matching the notches.
  13. Finish the lower edges of the dress and sleeves, press the hem allowances to the wrong side and topstitch.
  14. Wear the dress with a belt 1.5–2 cm wide.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?